Bedienungsanleitung Sony RHT-G800 (Seite 27 von 48) (Englisch)

62548

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Advanced Settings

See the tables on pages 28 to 29 for

information on the numeric code(s)

corresponding to the component and the

manufacturer of the component (the first

digit and the last two digits of the numeric

code correspond to the category and the

manufacturer’s code, respectively).

You can select one of them when there are

two or more code numbers.

The input button (TV, DVD/BD, SAT,

AUDIO) lights up when you press the

number button.

3 Press ENTER.

The setting is completed after the input

button you pressed in step 1 flashes twice.

4 Repeat steps 1 to 3 to control other

components.

To cancel programming

Press the input button (TV, DVD/BD, SAT,

AUDIO) you pressed in step 1.

To activate the input after

programming

Press the programmed button to activate the

input you want.

If programming is unsuccessful,

check the following:

• If the input button you pressed in step 1 does

not light up, the batteries are weak. Replace

both batteries.

• If you do not press the following button within

60 seconds during registration, the operation

will become invalid. Perform the process from

step1 again.

• An error has occurred when the input button

you pressed in step 1 flashes five times after

ENTER has been pressed in step 3. Perform

the process from step 1 again.

• You can program only a manufacturer code numbered

from 500 to 599 on the TV (white) button.

• In step 1, if several input buttons (TV, DVD/BD,

SAT, AUDIO) are pressed, only the last pressed

button is valid.

• For the numeric codes, only the three digits entered

last are valid.

To clear the memory of the

remote

First press and hold 2 –, then press and hold ?/

1. Next, while pressing and holding the first two

buttons, press AV ?/1.

All input buttons (TV, DVD/BD, SAT, AUDIO)

flash together, then go off.

The numeric codes

corresponding to the component

and the manufacture of the

component

Use the numeric codes in the tables on pages 28

to 29 to control non-Sony components and also

Sony components that the remote is normally

unable to control. Since the remote signal that a

component accepts differs depending on the

model and year of the component, more than one

numeric code may be assigned to a component.

If you fail to program your remote using one of

the codes, try using other codes.

The initial settings are underlined.

• The numeric codes are based on the latest information

available for each brand. There is a chance, however,

that your component will not respond to some or all

of the codes.

• All of the input buttons on this remote may not be

available when used with your particular component.

Default Settings

The default settings of each input are as follows.

Notes

Input Code(s)

DVD/BD DVD 403

TV TV 501

SAT Satellite Tuner 824

AUDIO None

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony RHT-G800 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony RHT-G800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info