67640
23
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
23
GB
Controlling the volume
of visual components
connected to an audio
component
The volume control buttons (2 +/- and
%) of the Remote Commander are factory
preset to control the volume based on the
assumption that you hear the sound of
your visual components from your TV
speakers, and that you hear sound of your
audio components from the loudspeakers
connected to your amplifier.
The remote control signal transmitted by
pressing the volume control buttons are
factory preset as follows:
Visual component: Transmits the
signal to control the volume of a TV.
Audio component: Transmits the
signal to control the volume of an
amplifier.
For example, to control the volume while
using a DVD player, you do not need to
select the TV to control the TV volume.
If an amplifier is connected to visual
components, change the volume control
setting of all the visual components to
control the volume of the amplifier.
1 While pressing the (light)
button, press the OTHER
button .
“SET MODE” appears as the screen
title.
2 Press the V/v buttons to
select “6 UTILITY”, then
press the OK button or the
centre Label select button.
“UTILITY” appears as the screen
title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
3 Press the V/v buttons to select
“3 AUDIO SETTING”, then
press the OK button or centre
Label select button.
“AUDIO SETTING” appears as the
screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
4 Press the b button or right
Label select button.
A beep sounds and “AMP” is shown
inside the [ ].
5 Press the (light) button or
the RETURN button three
times.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.
To reset the settings
Press the B button or the left Label select button
in step 4.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony RMVL1400T.CE7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 Bedienungsanleitung - Deutsch, Holländisch, Französisch, Italienisch - 180 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info