Bedienungsanleitung Sony SDM-HX73 (Seite 41 von 376) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

47827

Zoom out

Zoom in

Vorherige Seite

1/376

Nächste Seite

SCREEN menu (analog RGB

signal only)

You can adjust the following items using the SCREEN menu.

• AUTO

• PHASE

•PITCH

•H CENTER

•V CENTER

x Automatic picture quality adjustment

function

When the monitor receives an input signal, it automatically

adjusts the picture’s position and sharpness (phase/pitch), and

ensures that a clear picture appears on the screen (page 20).

Note

While the automatic picture quality adjustment function is activated, only

the 1 (power) switch will operate.

If the automatic picture quality adjustment function of this

monitor seems to not completely adjust the picture

You can make further automatic adjustment of the picture quality for the

current input signal (See “AUTO” below).

If you still need to make further adjustments to the picture

quality

You can manually adjust the picture’s sharpness (phase/pitch) and

position (horizontal/vertical position).

These adjustments are stored in memory and automatically

recalled when the monitor receives a previously input and

registered input signal.

x Make further automatic adjustments to the

picture quality for the current input signal

(AUTO)

1 Press the MENU button.

The main menu appears on the screen.

2 Press the m/M buttons to select (SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

3 Press the m/M buttons to select “AUTO” and press

the OK button.

Make the appropriate adjustments of the screen’s phase, pitch

and horizontal/vertical position for the current input signal

and store them.

x Adjust the picture’s sharpness manually

(Phase/Pitch)

You can adjust the picture’s sharpness as follows. This

adjustment is effective when the computer is connected to the

monitor’s HD15 input connector (analog RGB).

1 Set the resolution to 1280 × 1024 on the computer.

2 Load the CD-ROM.

3 Start the CD-ROM, select the area and model, and

display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4 Press the MENU button.

The main menu appears on the screen.

5 Press the m/M buttons to select (SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

6 Press the m/M buttons to select “PHASE” and press

the OK button.

The “PHASE” adjustment menu appears on the screen.

7 Press the m/M buttons until the horizontal stripes

are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8 Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust

the pitch using the following procedures.

9Press the m/M buttons to select “PITCH” and press

the OK button.

The “PITCH” adjustment menu appears on the screen.

10 Press the m/M buttons until the vertical stripes

disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

Note

When receiving digital RGB signals from the DVI-D input connector

for INPUT3, adjustment is unnecessary.

EX I T

1280 1024 60Hzx

AUTO

PHASE

P TCH

H CENTER

V CENTER

SCREEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SDM-HX73 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info