Bedienungsanleitung Sony SDM-M61 (Seite 15 von 104) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

47839

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

G:\_Upload\4084256121\4084256121SDMM61AEP\02GB-SDMM61AEP\01GB02BAS-UC.fm

masterpage:Right

SDM-M61

4-084-256-12(1)

Changing the picture size

according to the signal (ZOOM)

The monitor is set to display the picture on the screen in full,

irrespective of the picture’s mode or resolution in the default

setting. You can also view the picture at its actual aspect ratio or

resolution.

Press the MENU button.

The main menu appears on the screen.

Press the M(+)/m(–) buttons to select (ZOOM) and

press the OK button.

The ZOOM menu appears on the screen.

Press the M(+)/m(–) buttons to select the desired

mode.

1280 × 1024 resolution signals fill the entire screen and

ZOOM is not possible regardless of these settings.

• FULL2: The input signal is displayed on the screen in full,

irrespective of the picture’s mode or resolution.

• FULL1: The input signal is displayed on the screen at its

actual aspect ratio. Therefore, black bands may appear at

the top and bottom of the picture depending on the signal.

• REAL: The input signal is displayed on the screen at its

actual resolution. Sub-SXGA signals are displayed at the

center of the screen surrounded by a black frame.

To restore the default setting (displayed on the screen in full)

Select “FULL2” in step 3.

Smoothing the picture

(SMOOTHING)

If the picture displayed at the FULL2 or FULL1 mode of ZOOM

is not smooth, use the picture smoothing function. Note that 1280

× 1024 resolution signals are shown only in REAL mode and

SMOOTHING is not possible.

Press the MENU button.

The main menu appears on the screen.

Press the M(+)/m(–) buttons to select

(SMOOTHING), and press the OK button.

The SMOOTHING menu appears on the screen.

Press the M(+)/m(–) buttons to select the desired

mode.

The smoothing effect becomes stronger in the order of

TEXTtSTANDARDtGRAPHICS.

• TEXT: To make the characters appear clear. (This mode is

suited for text-based applications.)

• STANDARD: Standard smoothing effect (factory preset

smoothing effect)

• GRAPHICS: To make the pictures appear clean. (This

mode is suited for CD-ROM software such as photo

images or illustrations.)

Note

When you set the ZOOM menu to REAL, the SMOOTHING menu is not

available.

Changing the menu’sposition

(MENU POSITION)

You can change the menu position if it is blocking an image on

the screen.

Press the MENU button.

The main menu appears on the screen.

Press the M(+)/m(–) buttons to select (MENU

POSITION) and press the OK button.

The MENU POSITION menu appears on the screen.

Press the M(+)/m(–) buttons to select the desired

position.

There are three positions each for the top of the screen and the

bottom of the screen, and one for the screen center.

01GB02BAS-UC.book Page 15 Monday, July 2, 2001 2:26 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SDM-M61 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info