Bedienungsanleitung Sony SDM-S73E (Seite 17 von 321) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

47877

Zoom out

Zoom in

Vorherige Seite

1/321

Nächste Seite

Reducing the power consumption

(ECO mode)

If you press the ECO button on the front of the monitor

repeatedly, you can select the screen brightness.

Each mode appears on the screen and the screen brightness is

reduced according to the mode. The menu automatically

disappears after about 5 seconds.

Screen brightness and power consumption are reduced as the

mode changes from HIGH to MIDDLE to LOW.

The default setting of the screen brightness is set to USER.

If you select USER, you can adjust the backlight level by pressing

the m/M buttons, the same as when you select BACKLIGHT

using the menu.

NOTE

Only while the ECO mode is set to USER, are the BACKLIGHT,

CONTRAST, and BRIGHTNESS items of the menu available (page 12).

Automatic picture quality

adjustment function

(SDM-S73E/S74E

analog RGB signal only)

When the monitor receives an input signal, it

automatically adjusts the picture’s position and

sharpness (phase/pitch), and ensures that a clear

picture appears on the screen.

The factory preset mode

When the monitor receives an input signal, it automatically

matches the signal to one of the factory preset modes stored in the

monitor’s memory to provide a high quality picture at the center

of the screen. If the input signal matches the factory preset mode,

the picture appears on the screen automatically with the

appropriate default adjustments.

If input signals do not match one of the factory

preset modes

When the monitor receives an input signal that does not match one

of the factory preset modes, the automatic picture quality

adjustment function of this monitor is activated to ensure that a

clear picture always appears on the screen (within the following

monitor frequency ranges):

Horizontal frequency: 28–80 kHz

Vertical frequency: 48–75 Hz

Consequently, the first time the monitor receives input signals

that do not match one of the factory preset modes, the monitor

may take a longer time than normal to display the picture on the

screen. This adjustment data is automatically stored in memory so

that next time, the monitor will function in the same way as when

the monitor receives the signals that match one of the factory

preset modes.

If you adjust the phase, pitch, and picture position

manually

For some input signals, the automatic picture quality adjustment

function of this monitor may not completely adjust the picture

position, phase, and pitch. In this case, you can set these

adjustments manually (page 13). If you set these adjustments

manually, they are stored in memory as user modes and

automatically recalled whenever the monitor receives the same

input signals.

Note

While the automatic picture quality adjustment function is activated, only

the 1 (power) switch will operate.

ECO

ECO LOW

ECO USER

ECO HIGH

ECO MIDDLE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SDM-S73E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info