Bedienungsanleitung Sony SDM-S74E (Seite 13 von 321) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch)

47879

Zoom out

Zoom in

Vorherige Seite

1/321

Nächste Seite

Adjusting the picture’s

sharpness and centering

(SCREEN) (SDM-S73E/S74E analog

RGB signal only)

x Automatic picture quality adjustment

function

When the monitor receives an input signal, it

automatically adjusts the picture’s position and

sharpness (phase/pitch), and ensures that a clear

picture appears on the screen (page 17).

Note

While the automatic picture quality adjustment function is activated, only

the 1 (power) switch is operable.

If the automatic picture quality adjustment function of

this monitor did not seem to adjust the picture

completely

You can make further automatic adjustment of the picture quality

for the current input signal. (See AUTO below.)

If you still need to make further adjustments to the

picture quality

You can manually adjust the picture’s sharpness (phase/pitch) and

position (horizontal/vertical position).

These adjustments are stored in memory and automatically

recalled when the display receives the same input signal.

These settings may have to be repeated if you change the input

signal after reconnecting your computer.

x Make further automatic adjustments to the

picture quality for the current input signal

(AUTO)

1 Press the MENU button.

The main menu appears on the screen.

2 Press the m/M buttons to select (SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

3 Press the m/M buttons to select AUTO and press the

OK button.

Make the appropriate adjustments of the screen’s phase, pitch

and horizontal/vertical position for the current input signal

and store them.

4 Press the m/M buttons to select and press the OK

button.

Return to the menu screen.

x Adjust the picture’s sharpness manually

(PHASE/PITCH)

You can adjust the picture’s sharpness as follows.

1 Set the resolution to 1280 × 1024 on the computer.

2 Load the CD-ROM.

3 Start the CD-ROM, select the region and model, and

display the test pattern.

For Windows

Click [Utility] t [Windows]/[Win Utility.exe].

For Macintosh

Click [Utility] t [Mac]/[Mac Utility].

4 Press the MENU button.

The main menu appears on the screen.

5 Press the m/M buttons to select (SCREEN) and

press the OK button.

The SCREEN menu appears on the screen.

6 Press the m/M buttons to select PHASE and press

the OK button.

The PHASE menu appears on the screen.

7 Press the m/M buttons until the horizontal stripes

are at a minimum.

Adjust so that the horizontal stripes are at a minimum.

8 Press the OK button.

The main menu appears on the screen.

If vertical stripes are observed over the entire screen, adjust

pitch by the following steps.

9 Press the m/M buttons to select PITCH and press the

OK button.

The PITCH menu appears on the screen.

10 Press the m/M buttons until the vertical stripes

disappear.

Adjust so that the vertical stripes disappear.

11 Click [END] on the screen to turn off the test pattern.

Note

When receiving digital RGB signals from the DVI-D input connector,

adjustment is not necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SDM-S74E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info