446010
74
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
74
Searching using the Smart Search function
Tips
You can store information for up to 24 programmes on a single list.
While recording, you can display the SMART SEARCH screen using the SMART SEARCH
button. If you decide to stop recording, press SMART SEARCH to make the SMART
SEARCH screen disappear first. Then press x STOP.
Notes
You cannot use this function unless the clock is set.
Depending on the tape, the total or remaining time may not appear correctly.
If many short programmes are recorded on a tape, multiple programmes may be included in a
single block. In this case, only the latest programme information will appear in the SMART
SEARCH screen.
Blank time is measured from the end of the last recorded programme to the end of the tape.
However, if you eject the tape and then make a new recording on the same tape, the original
recorded programme(s) is displayed as a blank space.
If no information is stored in the VCRs memory, LATEST DATA does not appear in the
SMART SEARCH screen.
The station name* may not appear if the VCR does not receive station name information
signals.
If you start recording a programme D from the middle of a previously recorded programme
A and into another previously recorded programme B, the Smart Search information for
the second programme B, which is recorded over, is deleted.
* not available on SLV-SE600A/E and SX600E
3
Press M/m to highlight LATEST DATA.
If you want to reset the latest data screen,
highlight NO DATA and press OK, then record a
programme.
4
Press OK.
The latest data stored in the VCRs memory is displayed.
SMART SEARCHEXIT :
14 :00 15 :00 FGH
0
29 .9
.93
19 :00 20 :00
3
DATE TIME PROG.
28 .9 5
SET :
SELECT :
OK
SMART SEARCH
NO DATA
LATEST DATA
20 :00 21 :00 AAB
6:30 7:00
IJK1.10
Originally recorded programmes
AB
Recording the programme D over the programme A and B
C
AD C
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony SLV-SX700E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony SLV-SX700E

Sony SLV-SX700E Bedienungsanleitung - Deutsch - 100 seiten

Sony SLV-SX700E Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info