Bedienungsanleitung Sony SNC-EB640 (Seite 72 von 80) (Englisch)

699440

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Administrating the Camera

Setting the Action output — Action output Menu

Suffix

Select a suffix to be added to the file name used when the

image is sent.

None: The name of the sent file will be the image file

name.

Date & time: The date & time suffix is added to the

image file name.

The date & time suffix consists of last two-digits of

the year (2 digits), month (2 digits), date (2 digits),

hour (2 digits), minute (2 digits), second (2 digits),

and sequential number (2 digits), thus adding 14-

digit number to the image file name.

Sequence number: A sequential 10-digit number

0000000001-4294967295 and a sequential 2-digit

number are added to the image file name to be sent.

Sequence number clear

If you click Clear, the suffix of the Sequence number

returns 1.

Send

If you click Execute, the image will be sent to the FTP

server once for testing according to the settings of

manual sending.

OK/Cancel

See “Buttons common to every menu” on page 23.

White LED tab

Display sample: SNC-CX600W

Supported models: SNC-CX600W/CX600

Set the Illuminator level and lighting time of the White

LED when the Presence Sensor detects an object.

Display sample: SNC-VB632D

Supported model: SNC-VB632D/VB642D

Set the Illuminator level and lighting time of the White

LED, and the Color or monochrome selectable setting

when the Motion detection detects an object.

Illuminator level

Select the White LED Illuminator level from 1 to 6.

1 is the weakest and 6 is the strongest one.

Test

Perform the lighting test of the White LED.

When you press the execute button, the LED lights up

with the illuminator level you set. When you press the

stop button, the LED turns off.

A message appears if you press the execute button after

changing the illuminator level. Click OK if you want to

change the illuminator level setting.

Duration

Supported models: SNC-CX600W/CX600

Select the White LED lighting time from 5 seconds to

30 minutes.

Supported model: SNC-VB632D/VB642D

Select the White LED lighting time from 20 seconds to

30 minutes.

Tips

• The lighting time will be extended if the Presence

Sensor continues to detect an object. (SNC-CX600W/

CX600)

• The lighting time will be extended if the Motion

detection continues to detect an object. (SNC-

VB632D/VB642D)

Color or monochrome selectable

Supported model: SNC-VB632D/VB642D

You can select Monochrome/Color from Color or

monochrome selectable for the illumination color.

OK/Cancel

See “Buttons common to every menu” on page 23.

Notes

Supported model: SNC-VB632D/VB642D

When the White LED is synchronized with the motion

detection function:

•Set White LED in the Execution Condition tab of

the Action output menu to Motion detection.

•Set Mode in the Day/Night tab of the Video / Audio

menu to Auto, and set Sync with IR Illuminator to

On.

• When the White LED lights by synchronizing with the

motion detection function, it has the following

limitations:

– the accuracy of motion detection (VMD) may be

low depending on the angle of the image and the

VMD settings.

– false or missed detections may occur under the

following conditions:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-EB640 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-EB640

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info