Bedienungsanleitung Sony SNC-EM632RC (Seite 34 von 80) (Englisch)

699447

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Administrating the Camera

Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu

input connector or the built-in microphone. It is

adjustable from –10 to +10.

Audio codec

Select the codec type for sending audio input from the

m microphone input connector or the built-in

microphone. The bit rate may differ, depending on the

codec type.

Note

No audio is output if the Plug-in free viewer is used.

Audio upload

You can output audio that is input to your computer’s

audio input terminal to the speaker connected to the line

output jack of the camera or the built-in speaker of the

camera.

This function is not available for SNC-XM637/XM636/

XM632/XM631.

Enable

Select the checkbox to enable the audio upload function.

Volume

Set the speaker volume level from –10 to +10.

OK/Cancel

See “Buttons common to every menu” on page 23.

Superimpose Tab

Select whether or not to superimpose the custom string

and the character date & time on the image.

You can set the superimpose on/off, font sizes, and

display items to display for Image 1, Image 2, and

Image 3 separately in this camera.

Notes

• For setting the superimposing, set Image size1 in the

Video codec tab of the Video / Audio menu or Video

menu to the maximum rate.

• Deselect the checkbox of Stabilizer in the Installation

tab of the System menu. After setting superimpose, set

the Stabilizer function again.

Preview screen

Preview the image, and adjust the superimposed image.

You can move the position of superimposed image

displayed on the preview screen by drag and drop.

Image

Select the video codec mode to set for the superimposed

image.

The setting for the superimposed image is available if

you select the checkbox next to the list box.

For details about the video codec mode, see the Video

codec tab in the Video / Audio menu or Video menu.

Position

Select the number of the display position or logo, on the

preview screen. When Logo is selected, the logo file

setting is displayed.

Note

Permissible logo file specifications;

File format: PNG8 with alpha channel

Image size: 640 × 120 or smaller (Image 1, Image 2)

160 × 120 or smaller (Image 3)

Width (pixels): multiples of 16

When the Image rotate in the Installation tab of the

System menu is set to 90 degrees or 270 degrees, set the

width pixels to a multiple of 16.

When display position number 1, 2 or 3 is selected, the

following setting menus appear.

Type

Set the type of display information to codec, date &

time, event or text.

Text: Displays the custom string.

Date & time: Displays the date and time.

Event: Displays the event alarm information.

Codec: Displays the video codec information.

Custom string

Describes the superimposed content for each position.

For Type setting, codec is displayed as <codecinfo>,

date & time is displayed as <datetime>, event is

displayed as <event>, and you can add a custom string.

Use alphanumeric other than “#”, “&”, “(”, or “$”.

Text color

Select the font color of the superimposed text.

Background color

Select the background color of the superimposed text.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-EM632RC Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-EM632RC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info