Bedienungsanleitung Sony SNC-EP520 (Seite 56 von 99) (Englisch)

699842

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

SNC EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550

Administrating the Camera

Using the 802.1X Authentication Function — 802.1X Menu

To delete the CA certificate

Click Delete, and the CA certificate stored in the camera

will be deleted.

Setting the 802.1X authentication

function – Example of Windows

Server 2003

This section explains how to configure the

authentication server and CA using Microsoft Windows

Server 2003.

Note

As this section describes authentication based on the

user interface in English on Windows Server 2003, the

UI terminology and page configuration may be different

depending on the version of the Operating System or

Service Pack and patch update status.

Before setting

Perform the following settings before configuring an

802.1X network.

Active Directory (domain controller)

The following setting example is based on the

assumption that the Active Directory has been

configured.

Windows IAS configuration

Configure Remote access/VPN server in Manage

Your S e rv e r of Windows Server 2003. Open Add or

Remove Programs from Control Panel of Windows

menu. Install Internet Authentication Service in Add/

Remove Windows Components.

CA configuration

To configure the CA, perform the following steps:

Open Add or Remove Programs from Control

Panel of the Windows menu.

Select Add/Remove Windows Components.

Add Certificate Services in the Component menu.

Select Enterprise root CA on CA Type.

Type the CA name on Common Name for this

CA, and configure the CA.

Creating a security group for Active

Directory

Open Active Directory Users and Computers

from Administrative Tools of the Windows menu.

Select Users of the domain with which you want to

perform 802.1X connection.

Select New from the context menu, then select

Group and configure the group for 802.1X

connection.

For example, the group “Wired_802.1X_Group” is

assumed for explanation purposes.

Configuring the Internet Authentication

Service

Open Internet Authentication Service from

Administrative Tools of the Windows menu.

Click Register Server in Active Directory on the

operation menu.

Read the displayed precautions carefully and click

OK to accept them.

Then, continue to configure the EAP-TLS policy.

Select Remote Access Policy and right-click.

Select New from the context menu, and select

Remote Access Policy to open “New Remote

Access Policy Wizard.”

Select Set up a custom policy.

Set the following items:

Policy name: Type “Allow 802.1X Access” as an

example.

Policy conditions: Click Add and add the

following items:

– NAS Port-Type: Ethernet, Wireless-

IEEE802.11, Wireless-Other and Virtual

(VPN)

– Windows-Groups: Wired_802.1X_Group

Permissions: Select Grant remote access

permission.

Edit Profile:

– Dial-in Constraints tab: Specify the session

time out period during which the client is

allowed to be connected, as required.

– Authentication tab: Delete checks from all the

boxes. Click EAP Method and add Smart

Card or other certificates.

Then, continue to configure the RADIUS client.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-EP520 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-EP520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info