Bedienungsanleitung Sony SNC-ER580 (Seite 83 von 99) (Englisch)

699849

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

SNC-EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550

Administrating the Camera

Setting the Sensor input/Camera tampering detection/Motion detection — Event detection menu

Camera tampering detection tab —

Set the camera tampering detection

Camera tampering detection

Select On to activate the function to detect the camera

tampering, such as direction shifting or spray. When you

select On, you can select the Sensitivity.

Sensitivity: Set the sensitivity of camera tampering

detection High, Middle or Low.

Detection status: Display the tampering detection state

of the time when Camera tampering detection tab is

opened. To clear the detection status, click Clear

button.

Note

Using the Privacy masking function reduces the

sensitivity of camera tampering detection. When camera

tampering detection does not work, set the sensitivity

higher. When a screen is masked more than 60%, the

camera tampering detection will refuse to respond even

if Sensitivity is set to High. Test this function before

using it.

OK/Cancel

See “Buttons common to every menu” on page 26.

Motion detection tab — Set the

motion detection

Motion detection detects moving objects in the camera

image and outputs an alarm.

Notes

• Before actual use, perform an operation test and

confirm that the motion detection function works

correctly.

• Using the Privacy masking function disables the

Motion detection function for the masked area.

• The Motion detection menu may not be displayed

depending on the function settings. To display the

Motion detection menu, configure as follows.

Installation tab in the System menu (page 32)

– Video out: Off (SNC-ZP550/ZR550)

Camera menu-Video codec tab (page 40)

– Letterbox: Off. (SNC-EP550/EP580/ER550/

ER580/ER585/ER585H/ZP550/ZR550)

– Cropping: Off. (SNC-EP550/EP580/ER550/

ER580/ER585/ER585H/ZP550/ZR550)

– Codec of Image 2: Off.

• The motion detection function deactivates during PTZ

control, and also while the camera is moving to a

preset position. Once PTZ control is completed or the

camera arrives at the preset position, the motion

detection function reactivates.

When the Motion detection menu is

displayed for the first time

When you click Motion detection, “Security Warning”

is displayed.

When you click Yes , ActiveX control is installed and the

Motion detection menu is displayed.

Notes

• If Automatic configuration is enabled in the Local

Area Network (LAN) settings of Internet Explorer, the

image may not be displayed. In that case, disable

Automatic configuration and set the Proxy server

manually. For the setting of the Proxy server, consult

your network administrator.

• When you install ActiveX control, you should be

logged in to the computer as Administrator.

Setting items for motion detection

Use the settings tab to set the conditions for the motion

detection function while observing camera images. This

menu is the same as the settings menu displayed when

you click Detection on Alarm transmission on the

e-Mail (SMTP) menu, or on the FTP client menu.

Click the desired item in the setting item list to set the

respective detection area.

Monitor screen

Setting item list Setting area

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-ER580 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-ER580

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info