Bedienungsanleitung Sony SNC-ER585 (Seite 31 von 99) (Englisch)

699850

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Administrating the Camera

Configuring the System — System Menu

Supported image file format: gif89a format (GIF

animation and transparent GIF format are not

supported.)

Maximum image size:

320 × 60 (SNC-EP520/EP521/ER520/ER521)

640 × 120 (SNC-EP550/EP580/ER550/ER580/

ER585/ER585H/ZP550/ZR550)

Number of horizontal pixels: An even number

Maximum file size: Approximately 50 KB

Notes

• Both Text and Logo cannot be used at the same time.

• Camera ID is applied to both Image 1 and Image 2.

• If the image size of the logo is larger than the image,

it cannot be displayed.

•While Video out is set to On, when you set Image 2

to On, the images set to be output from Video out are

displayed (SNC-ZP550/ZR550).

Camera Direction

Select either of Azimuth or Area title.

Azimuth

Displays the azimuth with the direction specified in

North as north.

Mode: Select between 4-azimuth or 8-azimuth displays.

Selecting Off will disable the displaying of the

azimuth.

North: Change the direction of the camera and click

Set. This will set that direction as north. Click Call

to change the direction of the camera to the direction

set as north.

Area title

Selecting an area title will display the registered string

according to the direction the camera is facing.

Here, set the display name for the area the camera is

facing. The maximum number of areas that you can

Enter the string to display.

Put a check in the checkbox.

Move the camera to the specified lower left area

and click Lower left.

Move the camera to the specified upper right area

and click Upper right.

Click Set.

Preset position

While this item is checked, the preset position name is

displayed when the camera moves to the preset position

you have registered.

The preset position name is displayed prior to the

azimuth and area title.

Image

Select either Image 1 or Image 2 to specify whether to

superimpose on or not, set the font size and configure

each item that display position is assigned.

Superimpose

On/Off: When using the Superimpose function, select

On.

Font size: Set the font size.

Superimpose format

Set the items to superimpose according to the displayed

position. English one byte characters and symbols are

displayed. Available items are as follows:

• Off: Set not to superimpose.

• Text: Set to display a string that you want. You can

enter characters in the right free space.

• Date & time: Set to display date and time.

• Camera ID: Set to display Camera ID.

• Codec: Set to display the bit rate and frame rate.

• Zoom ratio: Set to display the zoom ratio.

• Camera direction: Set to display the azimuth, area

title or name of a preset position.

• Event: Set to display an event record.

Notes

• The items except for Off and Text cannot be set at the

same time.

• Depending on the length of the string you enter in

Text, the string display may crossover the other item.

In this case, change the display position, change the

font size or modify the string.

OK/Cancel

See “Buttons common to every menu” on page 26.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-ER585 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-ER585

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info