Bedienungsanleitung Sony SNC-VB770 (Seite 40 von 68) (Englisch)

699840

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Administrating the Camera

Security Menu — Setting the Security

To delete the imported certificate or self-signed

certificate

Click Delete to delete the certificate or self-signed

certificate imported to the camera.

Private key password

Type the password for the private key information

included in the certificate using up to 50 characters. This

text box is active only when Certificate options is set to

Use an external certificate.

Leave the text box blank if the private key information

included in the certificate is not encrypted.

If no private key password is set in the camera, an active

text field is displayed and this allows a password to be

entered.

If a private key password is already set, it is displayed as

an inactive text field.

Reset

To change the private key password, click this button.

The current password is cleared and the password text

box becomes active to allow a new password entry.

Note

Click Cancel at the bottom of the menu if you want to

cancel changing the private key password after clicking

Reset. Doing so restores the other setting items in the

Client certificate tab to the previous settings.

SSL client authentication

In this tab, you can manage the CA certificate needed for

the camera to use the client authentication of the SSL

function.

Notes

• When using the client authentication, the personal

certificate must be successfully installed on the PC to

use it. If this preparation cannot be performed, do not

configure settings on this tab. Otherwise, you may not

be able to connect to the camera.

• The setting of SSL client authentication is available

only when SSL server authentication certificates are

uploaded.

Enable

You can configure whether to enable the client

authentication of the SSL function.

Trusted CA certificate 1 to 4

You can import a trusted CA certificate (route

certificate, etc.) to the camera.

Up to four certificates from trusted CAs can be imported

to the camera. Only PEM format is supported.

To import the CA certificate

Click Browse… to select the CA certificate to be

saved in the camera.

Click the OK button appearing on the dialog.

The selected file will be imported to the camera.

Note

Import process will be invalid if the selected file is not a

CA certificate.

To display the information of the CA certificate

When the CA certificate has been saved in the camera

correctly, its information appears on Issuer DN,

Subject DN, Validity Period, and Extended Key

Usage for your reference.

To delete the CA certificate

Click Delete to delete the selected CA certificate from

the camera.

Tip

To enable a client certificate, it is recommended that the

settings are configured following the procedure below:

1 Import the necessary CA certificate.

2 Select the SSL client authentication

checkbox and click OK.

Note

When you set SSL client authentication to Enable and

click OK, the camera will immediately operate to enable

client authentication. Make sure that the personal

certificate on your PC is successfully installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-VB770 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-VB770

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info