Bedienungsanleitung Sony SNC-VM772R (Seite 28 von 68) (Englisch)

699841

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Administrating the Camera

Video / Audio Menu — Setting the Camera Image and Audio

Frame rate

Set the frame rate of the image.

“fps” is a unit indicating the number of frames

transmitted per second.

The frame rate of JPEG images can be changed by the

setting of Image quality.

I-picture interval

Set the I-picture insertion interval in seconds.

B-picture

Select whether B-picture is available or not. Only when

the image size is more than 1920 × 1080 with H.264, it

can be set.

H.264 profile

Set the profile setting for H.264 video codec to high or

main. The video compression efficiency is high and

main in sequence. The specified profile may not be

available depending on the program you use. Select the

profile which is suitable for your program.

Bit rate compression mode

Set CBR or VBR.

If you want to keep the bit rate fixed, select CBR. If you

want to keep the image quality fixed, select VBR.

Note

The frame rate or bit rate that is actually transmitted may

be different from the set values depending on image size,

scene, network environment.

Bit rate

When Bit rate compression mode is set to CBR

The bit rate of the image transmission for a line can be

set. When the bit rate is set to a high level, a high image

quality can be delivered.

When Bit rate compression mode is set to VBR, set the

target bit rate.

Max

When Bit rate compression mode is set to VBR, set the

maximum value of bit rate.

Note

If you reboot the camera after changing the output mode,

the following parameter is initialized.

JPEG quality

When Codec is set to JPEG, the image quality settings

are enabled.

The higher the value, the higher the image quality.

Intelligent cropping Tab

Function to crop the area of interest from a full image.

You can monitor the the area of interest with a high-

quality image with less bit rate by providing a full image

and area of interest image cropped from 4K resolution.

This option is available when Intelligent cropping

(Full HD) and Intelligent cropping (VGA) are selected

for output mode (System > Installation tab)

Image

If the output mode is set to Intelligent cropping (Full

HD), 2 to 3 are selectable.

If the output mode is set to Intelligent cropping (VGA),

2 to 5 are selectable.

Note

Enable each image in the Video codec tab.

Mode

Select between manual setting (Static) and moving

object tracking (Dynamic).

Static: Crop the area which is set manually. Adjust the

fixing position in the preview screen.

Dynamic: Waits at the home position until the moving

object is detected. After detecting the moving object

in the area, the cropping area will move

automatically.

Adjust the home position in the preview screen.

Note

To select the Dynamic, perform the motion detection

settings in advance.

Tracking monitoring range

Set the Trap area to Specific or Full.

Timeout of lost tracking

Select the time duration to wait and search moving

objects after the moving object disappears from the

view, and restart tracking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-VM772R Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-VM772R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info