Bedienungsanleitung Sony SNC-WR602C (Seite 62 von 73) (Englisch)

699859

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Administrating the Camera

Setting the Action output — Action output Menu

Edge Storage Tab — Setting the

Edge Storage movie and still image

function

With Edge Storage, video or audio signal can be

recorded from the alarm detection results, such as

network block, recorded video and audio can be

streamed with the same protocol as the real-time

streaming.

Notes

• The frame rate and operability on the viewer may be

reduced during movie or still image recording.

• The actual interval of recording a still image may be

longer than the interval you set.

• Stop the Edge Storage recording before you turn off

the power of the camera with a memory card inserted.

• Before you remove or insert a memory card, stop the

Edge Storage recording and turn off the power of the

camera.

• Before using a memory card, format it by Format

memory card in the Initialize tab of the System menu

(page 24).

• A maximum of 4000 movie records can be saved to an

memory card. If the checkbox of Overwrite is not

selected when the number of records reaches 4000,

new recordings cannot be made. If the checkbox of

Overwrite is selected when the number of records

reaches 4000, the unit will begin to overwrite old

records in ascending chronological order.

• Overwrite is not available for a memory card of less

than 4 GB.

• When recording H.264, the recorded data may

become very large and the video/audio may be

interrupted if the Adaptive rate control is set and other

image codec except CBR is selected. Therefore,

selecting CBR is recommended.

If you select CBR, set the video codec as follows:

–Set the

Bit rate

below 2000 kbps.

–Set the

Frame rate

below 30 fps.

–Set the

I-picture interval

to 1 second.

• When you record the JPEG with image size 1280 ×

720 or above, set the video codec as follows:

– SNC-WR630/WR632: Set the Image quality below

– SNC-WR600/WR602: Set the Image quality below

–Set the

Frame rate

to 1 fps.

• When you record, set the

Image codec 2

and

Image

codec 3

of the

Video codec

tab in the Video / Audio

menu to

Off

Common setting

Memory card

Display the available free space of external memory.

Maintenance information

Displays the status of the memory card if you are using

the memory card that corresponds to displaying

Maintenance information.

Overwrite

Select On to overwrite the file when there is insufficient

memory space.

When you select the checkbox, overwrite is enabled.

Old records will be overwritten in chronological order.

When you deselect the checkbox, overwrite is

prohibited, and no recording will be performed.

Note

Records are overwritten in chronological order,

regardless of whether they are movies or still images.

Edge Storage still image

Recording data

You can refer to still image files recorded in the memory

card. These files will be saved in a folder tree as follows.

/sdcard/EdgeStoragePicture/00000000-999999999/

00000000-99999999/

(Prefix)YYYYMMDDhhmmss00000001.jpg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-WR602C Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-WR602C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info