Bedienungsanleitung Sony SNC-WR632C (Seite 28 von 73) (Englisch)

699858

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Administrating the Camera

Setting the Camera Image and Audio — Video / Audio Menu

Video codec Tab

Use this tab to set the items for the video codec.

Full HD dual stream mode

Supported models: SNC-WR630/WR632

When you set this On, the highest resolution which can

be set on Image 2 will be 1920 × 1080.

When you set this Off, the highest resolution which can

be set on Image 2 will be 1280 × 720.

Note

When you set this mode On, High framerate mode

cannot be set to On.

High framerate mode

When the setting is set to On, set the maximum frame

rate to 60 fps (NTSC) or 50 fps (PAL).

When the setting is set to Off, the maximum frame rate

is 30 fps (NTSC) or 25 fps (PAL).

When the high framerate mode is changed, the camera

returns to the home position.

Notes

• When the setting is set to On, Image 2 may not be

available, and Image 3 is not available.

• When the high framerate mode setting is changed,

settings for Image 1, Image 2, and Image 3 are

returned to the default settings.

• When you set this On, Full HD dual stream mode

cannot be set to On. (SNC-WR630/WR632)

Image 1, Image 2, and Image 3

Up to three image codec modes can be set. Configure the

following setting for each image mode.

Image codec

Select H.264, JPEG, or Off. Note that Image 1 cannot

be set to Off.

Note

The selectable size of images and frame rate for Image

2 and Image 3 may be limited, depending on the setting

of codec type, image size, frame rate, and image quality

for Image 1.

• The total of frame rate for Image 1, Image 2, and

Image 3 should not exceed 60 fps.

• If you set the bitrate of Image 1 to 32000 kbps, set

Image 2 and Image 3 to Off.

• If you set the bitrate of Image 1 to 16000 kbps or

faster, set the bitrate of Image 2 and Image 3 below

4000 kbps.

If you set a value exceeding the standard, the following

symptoms may occur.

• The image delays more than usual.

• The frame is skipped when playing an image.

• The audio is broken.

• The response of the camera to commands is delayed.

Image size

You can select the size of images sent from the camera.

Notes

• Some parts of the screen may not be displayed

depending on the image size.

• If the image size is 720 × 574 or 720 × 480, the full

image is displayed but not in the 1:1 pixel aspect ratio.

Frame rate

Set the frame rate of the image.

“fps” is a unit indicating the number of frames

transmitted per second.

The frame rate of JPEG image can be changed by the

setting of Image quality.

I-picture interval

Set the I-picture insertion interval.

Select Time to set in seconds.

Select Frame to set in frames.

H.264 profile

Set the profile setting for H.264 video codec to high,

main, or baseline. The video compression efficiency is

high, main, and baseline in sequence. The specified

profile may not be available depending on the program

you use. Select the profile which is suitable for your

program.

Bit rate compression mode

Select CBR, VBR, or Adaptive rate control.

If you want to keep the bit rate fixed, select CBR. If you

want to keep the image quality fixed, select VBR.

If you select Adaptive rate control, the bit rate is

automatically optimized for unstable network

connections or wireless networks with a lot of

interference.

Notes

• The frame rate or bit rate that is actually transmitted

may be different from the set values depending on

image size, scene, network environment.

•The Adaptive rate control cannot operate when the

Plug-in free viewer is being used.

• If you want to use the Adaptive rate control, set the

connection method in the live viewer to Unicast. If

you set TCP as a connection method, the adaptive rate

control will be disabled. For details, refer to

“Switching Transmission Mode” in “Operating the

Camera” on page 18.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-WR632C Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-WR632C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info