Bedienungsanleitung Sony SNC-WR632C (Seite 41 von 73) (Englisch)

699858

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Administrating the Camera

Setting the Security — Security Menu

• When using the SSL function, always configure the

settings after setting the date and time of the camera.

If the date and time are not correctly set, it may cause

browser connection problems.

• Reload the window when you change the SSL setting.

Press the F5 key on the keyboard to reload.

Common setting

SSL function

Select Enable to use the SSL function.

When Enable (Allow HTTP connection for some

clients) is selected, both HTTP and SSL connections are

allowed. When Enable is selected, only SSL connection

is allowed.

When Internet Explorer is used

When SSL session is established, appears in the right

of the address bar on your web browser.

When you use SSL connection for the first time

When you use SSL connection only with the SSL

function Enable, you cannot access the camera if the

SSL function does not work properly.

In this case, you must reset the camera to the factory

settings. (All settings will be initialized.)

To avoid this, check that SSL connection is possible by

performing the following steps.

Set the SSL function to Enable (Allow HTTP

connection for some clients).

Click OK to close the viewer and the setting

window.

Display the viewer in SSL connection.

Refer to “Using the SSL function” on page 6 for

connection.

After confirming that SSL connection is possible,

set the SSL function to Enable.

Even if the setting window or the browser is closed as

SSL connection is impossible, http connection will be

possible if Enable (Allow HTTP connection for some

clients) is selected. First check the setting contents of

SSL tab in http connection, then check the SSL

connection again.

If Enable (Allow HTTP connection for some clients)

is not selected, you will not be able to access the camera

if SSL connection becomes impossible. In this case, turn

on the power of the main unit while pressing the reset

switch on the camera to initialize. For details, refer to the

supplied Installation Manual.

Note

SSL connection will load the camera down; therefore,

not all images may be downloaded, and the mark

may appear when the camera accesses the setting

window from the browser. In this case, reload the

window. Press the F5 key on the keyboard to reload.

SSL server authentication

Certificate options

Select an installation mode of the certificate.

Use an external certificate: Uses the certificate

including private key information issued by a CA.

The PKCS#12 and PEM formats are supported.

Note

SSL is not available when Certificate options-Use an

external certificate is selected, or certificate and private

key password is not set properly even SSL is set to

“Enable”.

Use a self-signed certificate (For test use): This mode

uses the certificate and private key pair generated by

“Self-signed certificate generation” on page 42.

Private key information corresponding to the

certificate is stored in the camera.

You do not need to install an external certificate.

However, you cannot execute the existence proof that

is one of the SSL functions for the following reasons.

– The private key generated in the camera is self-

signed by the camera.

– A prepared value is set for a distinguished name

(Common name, etc).

– The certificate is not issued by a trusted CA.

For reasons of security, we recommend using this

mode only when there is no problem even if perfect

security is not saved.

Notes

•When Use a self-signed certificate (For test use) is

selected, the Security Alert dialog appears on the

SSL connection with a browser.

For details, refer to “Using the SSL function”

(page 6).

• SSL connection may be impossible due to the type of

certificate installed in the camera. In this case, refer to

“How to install the CA certificate” on page 43 and

install.

To import the certificate

Click Browse... to select the certificate to be imported.

Click the OK button appearing on the dialog when you

select the file, to import it to the camera.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-WR632C Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-WR632C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info