Bedienungsanleitung Sony SNC-WR632C (Seite 54 von 73) (Englisch)

699858

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Administrating the Camera

Setting the Sensor input/Camera tampering detection/Motion detection — Action input Menu

When you place the cursor on the vertex of the area,

the cursor changes to n, which you can drag to

move the vertex.

Add non detection area

Clicking this button will add an inactive area

window in the center of the screen.

When you place the cursor on the area, the cursor

changes to a crossed arrow, which you can drag to

move the area.

When you place the cursor on the vertex of the area,

the cursor changes to n, which you can drag to

move the vertex.

Delete Area

Clicking this button will change the cursor to a

button. While the cursor is a button, click on a part

of the area to delete that area.

After the deletion, the cursor will return to its

original form. To exit this operation, click this

button again.

It is the same function as the button displayed under

VMF settings.

Add vertex

Clicking this button will change the cursor to a

button. In that state, when you click on a part of the

side of the area, a vertex is added to that point. After

the addition, the cursor will return its original form.

To exit this operation, click this button again.

It is the same function as the button displayed in

VMF settings.

Delete vertex

Clicking this button will change the cursor to a

button. In that state, when you click on a part of the

vertex of the area, the vertex added to that point is

deleted. After the deletion, the cursor will return its

original form. To exit this operation, click this

button again.

It is the same function as the button displayed in

VMF settings.

Note

The vertex can be moved in an outward direction

but cannot be moved toward the inside of an area.

Detection sensitivity

Set the sensitivity of motion detection.

A value from 1 to 256 can be specified.

Clicking Return to the default changes the value to the

default value.

Detection response

Set the response velocity of motion detection.

A value from 1 to 5 can be specified.

Clicking Return to the default changes the value to the

default value.

Detection size

Specify the minimum detection size and maximum

detection size for motion detection. To specify the

detection size, you can either enter values or drag the

vertexes of the area.

The area size is measured in pixels.

• When you place the cursor on the area, the cursor

changes to a crossed arrow, which you can drag to

move to the minimum detection size area and

maximum detection size area.

• When you place the cursor on the vertex of the area,

the cursor changes to n. Drag and move the vertex

to adjust the detection size.

Moving shadow exemption

Set ON/OFF for the moving shadow exemption function

of motion detection.

Selecting Do not respond to shadows will prevent the

shadows of a moving object from being recognized as

moving objects.

Deselect the checkbox to disable the shadow removal

function of motion detection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-WR632C Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-WR632C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info