Bedienungsanleitung Sony SNC-WR632C (Seite 63 von 73) (Englisch)

699858

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

Administrating the Camera

Setting the Action output — Action output Menu

Path: Displays the path name of the recording still

image file.

When you select a file, a still image will be displayed.

Delete: Click Delete to delete the selected folder or file.

If you select a folder, any files in the folder will also

be deleted.

Refresh: Click Refresh to reload the latest data.

Recording target

Select the video codec mode you want to record.

For detailed settings of video codec mode, see the Video

codec tab in the Video / Audio menu.

Notes

• You can record still images even if the video is

specified with an image codec set to H.264.

• Image quality setting for a still image can be changed

only when the image codec is set to JPEG.

• If you want to change the image quality of recorded

still images, change the image codec to JPEG.

• A folder containing no still image files may appear.

Image file name

The file name consists of three parts: a prefix, a file

number and an extension.

Set the prefix of up to 30 alphanumeric characters. You

can include - (hyphen) and _ (underscore) in the prefix.

The file number and extension are assigned

automatically by the camera.

The file number consists of the year (4 digits), month (2

digits), date (2 digits), hour (2 digits), minutes (2 digits),

seconds (2 digits), and a sequential number (8 digits).

Greenwich Mean Time will be included in the file name.

The extension is .jpg.

Edge Storage movie

Recording status

Display the current recording status.

The recording status will not be updated until the screen

is refreshed.

Use the Start Recording and Stop Recording button to

start or stop the recording manually.

Note

When recording manually, do not set Edge Storage

movie in the Execution Condition tab of the Action

output menu to Off.

Recording target

Video: Select the video codec mode you want to record.

For detailed settings of video codec mode, see the

Video codec tab in the Video / Audio menu.

Audio: Set whether to record the audio signals input

from the camera.

Select the checkbox to record.

Note

Set Audio sending (page 29) in the Audio tab of the

Video / Audio menu to Enable.

Recording capacity

Displays the maximum recording time in the current

camera setting of the video mode, image size, bit rate

and frame rate.

Pre-alarm period: Displays the maximum recording

time before the alarm is triggered.

Post-alarm period: Displays the maximum recording

time after the alarm is triggered.

Note

Maximum recording time varies depending on the

image size and quality setting in the Video / Audio

menu.

Recording time

Set the recording time for the Pre-alarm image/audio

and Post alarm image/audio.

Pre-alarm period: Type the recording time of the

image/audio before alarm detection.

Post-alarm period: Type the recording time of the

image/audio after alarm detection.

OK/Cancel

See “Buttons common to every menu” on page 21.

Voice alert Tab

Set the voice alert function, to output audio from the

speaker connected to the line output jack of the camera,

when an alarm is triggered by the sensor input or

detection functions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNC-WR632C Seite 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNC-WR632C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info