Bedienungsanleitung Sony SNT-EP154 (Seite 25 von 97) (Englisch)

699866

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

SNT-EX101/SNT-EX104/SNT-EP104

Administrating the unit

Configuring the System — System Menu

Maximum wait number

Sets the number of users who are permitted to wait for

their turn for control authority during operation by one

user. The selectable number is from 0 to 10. This is

effective when Exclusive control mode is set to On.

Notes

• To use Exclusive control mode, the date and time of

the system and the connected computer must be set

correctly first.

• To use Exclusive control mode, do not disable the

Web browser Cookie. If it is disabled, this mode

cannot be used.

• When you change the Exclusive control mode

setting, click Refresh on the Web browser to reflect

the change when opening the main viewer page.

OK/Cancel

See “Buttons common to every menu” on page 22.

Date & time Tab

Current date & time

Displays the date and time set on the unit.

Note

After you have purchased the camera, be sure to check

the date and time of the camera and set as necessary.

PC clock

Displays the date and time set on your computer.

Date & time format

Select the format of date and time to be displayed in the

main viewer from the drop-down list.

You can select the format between yyyy-mm-dd

hh:mm:ss (year-month-day hour:minutes:seconds),

mm-dd-yyyy hh:mm:ss (month-day-year

hour:minutes:seconds), and dd-mm-yyyy hh:mm:ss

(day-month-year hour:minutes:seconds).

Adjust

Select how to set the day and time.

Keep current setting: Select if you do not need to set

the date and time.

Synchronize with PC: Select if you want to

synchronize the unit’s date and time with the

computer.

Manual setting: Select if you want to set the unit’s date

and time manually.

Select the year, month, date, hour, minutes and

seconds from each drop-down list.

Synchronize with NTP: Select if you want to

synchronize the unit’s date and time with those of the

time server called NTP server (Network Time

Protocol).

Set the NTP server when Synchronize with NTP is

selected.

Use the following NTP server address: Synchronize

with the selected NTP server address.

NTP server 1: Enter the first choice for NTP server

address.

NTP server 2: Enter the second choice for NTP

server address.

NTP server 3: Enter the third choice for NTP server

address.

DHCP server: Select DHCP server when you need to

get NTP server information from DHCP server.

Multicast: Select Multicast when you search for an

NTP server with Multicast.

Time zone

Set the time difference from Greenwich Mean Time in

the area where the unit is installed.

Select the time zone in the area where the unit is

installed from the drop-down list.

For Japan, select “Osaka, Sapporo, Tokyo

(GMT+9:00)”

Automatically adjust the clock for daylight

saving time changes

When selected, the clock is automatically adjusted

according to the daylight saving time of the selected

time zone.

Note

If the time zone selected in Time zone is different from

that set on the computer, the time is adjusted using the

time zone difference and set on the system.

OK/Cancel

See “Buttons common to every menu” on page 22.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNT-EP154 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNT-EP154

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info