Bedienungsanleitung Sony SNT-EX101 (Seite 58 von 97) (Englisch)

699861

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

SNT EX101/SNT EX104/SNT EP104

Administrating the unit

Sending Images to FTP Server — FTP client Menu

Re-type password

To confirm the password, type the same characters as

you typed in the Password box.

Passive mode

Set whether you use the passive mode of FTP server or

not when connecting to the FTP server. Select On to

connect to the FTP server using the passive mode.

OK/Cancel

See “Buttons common to every menu” on page 22.

Alarm sending Tab — Setting the

FTP client action when detecting

the alarm

Set to forward an image and audio file to a specified FTP

server linked with alarm detection by the external sensor

input or by the built-in detection functions.

Note

When more than two of the following settings are

activated, the camera only creates two still images at the

same time. A third still image cannot be created unless

one of the previous two still images is sent.

e-Mail (SMTP) menu

– Alarm sending tab Alarm sending (when file

attachment is set to On).

– Periodical sending Periodical sending

FTP client menu

– Alarm sending tab Alarm sending

– Periodical sending Periodical sending

Trigger menu

– Mail (SMTP)

– FTP Client

Alarm sending

Select On to send the image and audio file to the FTP

server linked with alarm detection.

Remote path

Type the path to the destination using up to

64 characters.

Image file name

Type the file name you want to assign to the images

when sending to the FTP server. You can use up to 10

alphanumeric characters, - (hyphen) and _ (underscore)

for naming.

Suffix

Select a suffix to be added to the file name.

Date & time: The date & time suffix is added to the

image file name.

The date/time suffix consists of the year (2 digits),

month (2 digits), date (2 digits), hour (2 digits),

minute (2 digits) and second (2 digits), and

sequential number (2 digits), thus adding a 14-digit

number to the image file name.

Sequence number: A sequential number of 10 digits

between 0000000001 and 4294967295 and a

sequential 2-digit number are added to the image file

name.

Tip

A sequential number added to Date & time and

Sequence number is used to identify individual files

created with consecutive alarm events.

Sequence number clear

Click Clear to reset the Sequence number suffix to 1.

Alarm

Select the alarm to be linked with the file to be

forwarded to the FTP server.

Tip

The number of selectable input terminals is as follows:

SNT-EX101/SNT-EX101E: 2

SNT-EX104/SNT-EX154: 4

SNT-EP104/SNT-EP154: None *

* Alarm sending is available only for the simple motion

detection function.

Sensor input 1: The external sensor that is connected to

sensor input 1 of the I/O port.

Sensor input 2: The external sensor that is connected to

sensor input 2 of the I/O port.

Sensor input 3: The external sensor that is connected to

sensor input 3 of the I/O port.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNT-EX101 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNT-EX101

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info