Bedienungsanleitung Sony SNT-EX104 (Seite 81 von 97) (Englisch)

699863

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

SNT-EX101/SNT-EX104/SNT-EP104

Administrating the unit

Setting the Sensor input/Camera tampering detection/Motion detection/Audio detection — Event detection menu

Simple motion detection function

The following three simple functions are provided for

motion detection. The simple motion detection function

is available on the SNT-EP104 and SNT-EP154.

Detection level

Set the sensitivity of the motion detection. Set a scale

from [1] to [100].

Detection size

Specify the size of moving object to be detected, from

three options: Large, Medium and Small.

Motion level

If a moving object is shown in full screen, you can set

the degree of motion of the object to within a scale :

1 - 100 Check the current degree of motion on the level

meter and set the detection level referencing that value.

Note

VMF configuration is not available when the simple

motion detection function is activated.

Audio detection tab

— Set the audio detection

Audio detection detects sound picked up by a

microphone, and outputs an alarm beyond a certain

threshold.

Audio detection

Select On to activate the function and set the sensitivity .

Sensitivity

Set the Sensitivity to Low, High or Manual. If Manual

is selected, you may set the sensitivity manually.

Manual sensitivity

Set the Manual sensitivity from 1 to 100, the larger the

number, the greater the sensitivity.

Detection status: When Audio detection is set to On in

the Audio detection tab, the detection status is

displayed.

If excessive sound is picked up by the microphone,

“Detected” appears; otherwise “Non-detected” is

displayed. The input volume is indicated in a bar that

helps you to calibrate detection levels.

Notes

• Audio detection is not available on the SNT-EP104 or

SNT-EP154.

• For the SNT-EX154, audio detection is only available

for CH1.

• Test audio detection to confirm that it is functioning as

desired.

• The audio detection function sets the detection level

automatically according to the statistical samples of

input volume and the sensitivity. Thus, the detection

level may differ even with the same sensitivity.

• The detection of input volume cannot be updated

when the Audio detection tab is open. This means at

this time the detection level is not adjusted

automatically according to the input sound. According

to the characteristics, test audio detection when the

Audio detection tab is open.

• Before setting sensitivity, in order to optimize

detection, place the microphone in an ordinary

location and sound environment for about

3 minutes before opening the Audio detection tab.

• The Audio detection alarm is off during playback of

audio files.

• The Audio detection alarm is off while uploading

audio (from a computer).

OK/Cancel

See “Buttons common to every menu” on page 22.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNT-EX104 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNT-EX104

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info