Bedienungsanleitung Sony SNT-RS1U (Seite 62 von 97) (Englisch)

699867

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

SNT EX101/SNT EX104/SNT EP104

Administrating the unit

Recording Images in Memory — Image memory Menu

POP server name

This is necessary when POP before SMTP is selected

for Authentication.

Type a POP (receiving mail) server name using up to 64

characters, or type the IP address of the POP server. This

setting is necessary when the SMTP server that sends e-

mails performs authentication using the POP user

account.

POP port number

Enter a port number from 110 to 65535.

Authentication mode

Set the user authentication mode.

If you do not use CRAM-MD5, select Login.

Note

CRAM-MD5 is not featured in the models to Chinese

markets.

User name, Password

Type the user name and the password of the user who

owns the e-mail account. This setting is necessary when

the SMTP server that sends e-mails performs

authentication.

Administrator e-mail address

Type the e-mail address for the recipient of a warning

mail (e-mail address of the Administrator), using up to

64 characters.

OK/Cancel

See “Buttons common to every menu” on page 22.

Alarm recording Tab — Setting the

Image memory function when

detecting the alarm

You can set to record an image and audio file to the

memory linked with an external sensor input or built-in

detection functions.

Alarm recording

Select On to automatically record the image and audio

files from alarm detection to the built-in memory or

USB memory.

Image file name

Type the file name you want to assign to the image(s) to

be recorded. You can use up to 10 alphanumeric

characters, - (hyphen) and _ (underscore) for naming.

Suffix

Select a suffix to be added to the file name.

Date & time: The Date & time suffix is added to the

image file name.

The Date & time suffix consists of the year (2 digits),

month (2 digits), date (2 digits), hour (2 digits),

minute (2 digits), second (2 digits) and sequential

number (2 digits), thus adding a 14-digit number to

the image file name.

Sequence number: A sequential number of 10 digits

between 0000000001 and 4294967295 and an

sequential 2 - digit number is added to the image file

name.

Tip

A sequential number added to Date & time and

Sequence number is used to identify individual files

created with consecutive alarm events.

Sequence number clear

Click Clear to reset the Sequence number suffix to 1.

Alarm

Select the alarm to be linked with the recording of image

and audio files.

Tip

Number of selectable input terminals is as follows:

SNT-EX101/SNT-EX101E: 2

SNT-EX104/SNT-EX154: 4

SNT-EP104/SNT-EP154: None *

* Alarm sending is available only for the simple motion

detection function.

Sensor input 1: The external sensor that is connected to

sensor input 1 of the I/O port.

Sensor input 2: The external sensor that is connected to

sensor input 2 of the I/O port.

Sensor input 3: The external sensor that is connected to

sensor input 3 of the I/O port.

Sensor input 4: The external sensor that is connected to

sensor input 4 of the I/O port.

Tampering: An alarm that is triggered when the camera

detects tampering, such as direction shift or spraying.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SNT-RS1U Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SNT-RS1U

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info