Bedienungsanleitung Sony SRS-X88 (Seite 22 von 28) (Englisch)

656513

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

 Check that your wireless router is turned on.

 Bring the unit and wireless router closer

together. Devices that use the 2.4 GHz

frequency band, such as a microwave oven,

BLUETOOTH or digital cordless device, etc.,

may interrupt Wi-Fi communication. Move the

unit away from such devices or turn them off.

 Set the Wi-Fi antenna (aerial).

 If a Wi-Fi network is not possible even if the

setting of a Wi-Fi network is correct, try the

following.

 Turn off the wireless router/access point,

wait a while and turn on the power again.

 Turn off the unit, wait a while and turn on

the power again.

Distorted sound/humming or noise in the

unit output



Turn down the volume of the connected

device.

 If a connected device has an equalizer

function, turn it off.

 Keep the unit away from a microwave oven,

other wireless devices, etc.

 Keep the unit away from metal objects.

 Connect the unit and wireless router/PC via a

LAN cable, not via Wi-Fi network.

No sound/low sound level



Check that both the unit and connected

device are turned on.

 Turn up the volume of the unit and the

connected device.

 Check that the connected device is being

played back.

iTunes cannot find the unit via AirPlay



Make sure the PC with iTunes installed and the

unit are connected to the same home

network.

 Update the software version of iTunes to the

latest version.

/ (on/standby) indicator is flashing red



A software update is failed, or the unit is in the

protect mode. Check the following to resolve

the problem.

 The UPDATE button is flashing in orange.

Software update is failed. Update the

software using a USB flash drive. Check the

customer support website about how to

update the software with a USB flash drive.

Turn off the unit until you perform the

software update.

 The unit does not turn off by tapping the

/ (on/standby) button.

The unit is in the protect mode. Unplug the

AC power cord of the unit, and unplug all

other items connected to the unit. Then,

plug the AC power cord in again and turn

on the unit. If the / (on/standby)

indicator keeps flashing, consult your

nearest Sony dealer or the shop where you

purchased this unit.

The last setting is not kept



If the AC adaptor is disconnected while the

unit is on, the last usage setting before

disconnecting the AC adaptor is not kept. Turn

off the power of the unit, and then unplug the

AC adaptor.

The unit has entered standby mode or

BLUETOOTH/Network standby mode

unexpectedly



This is not a malfunction. The unit enters

standby mode or BLUETOOTH/Network

standby mode automatically due to the auto

standby function if no operation is performed

and no sound is input for about 15 minutes.

Refer to Help Guide for details about the auto

standby function.

To check Wi-Fi signal strength

(reception sensitivity)

While the unit is connected to the Wi-Fi

network, tap and hold the NETWORK button

until you hear a beep.

General

4 ·····

3 ·····

2 ·····

1 ·····

0 ·····

Signal

strength

Number of flashing

function indicators

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony SRS-X88 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony SRS-X88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info