Hint
As long as the BLUETOOTH function is activated on a BLUETOOTH device that has previously been connected with the
speaker, the speaker is reconnected with the device right after the speaker is turned on.
The above instructions on the BLUETOOTH device are provided as an example. For details, refer to the operating instructions
supplied with the BLUETOOTH device.
You can perform operations including establishment and disconnection of BLUETOOTH connections by using “Sony | Music
Center.”
You can connect the speaker concurrently with up to 2 BLUETOOTH devices. (Multipoint connection)
Note
For Apple iOS devices, the speaker is compatible with iOS 10.0 or later. A BLUETOOTH connection is not available on the
devices with iOS 9.x or earlier.
The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However,
when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If the pairing mode
is released before finishing the process, repeat from step .
Perform the pairing procedure on the BLUETOOTH device to detect the speaker.
When a list of detected devices appears on the display of the BLUETOOTH device, select “SRS-XG300.”
If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”
4
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
*
Make the BLUETOOTH connection from the BLUETOOTH device.
When the BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the
speaker and the activity of the (BLUETOOTH) indicator changes from flashing to lit.
If the BLUETOOTH connection is not established, repeat from step .
5
