Bedienungsanleitung Sony STR-DB1070 (Seite 20 von 68) (Englisch)

532259

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Initial settings

Parameter Initial setting

FRONT LARGE

CENTER LARGE

SURROUND LARGE

SURR BACK* LARGE

SURR BACK L/R** NO

SUB WOOFER YES

FRONT XX.X meter 5.0 meter

CENTER XX.X meter 5.0 meter

SURROUND XX.X meter 3.5 meter

SURR BACK XX.X meter 3.5 meter

SUB WOOFER XX.X meter 5.0 meter

S.W PHASE NORMAL

DISTANCE UNIT METER***

SURR POSI. SIDE

SURR HEIGHT LOW

SURR BACK HGT. LOW

FRONT SP > XXX Hz STD (120 Hz)

CENTER SP > XXX Hz STD (120 Hz)

SURROUND SP > XXX Hz STD (120 Hz)

SURR BACK SP > XXX Hz STD (120 Hz)

LFE HIGH CUT > XXX Hz STD (120 Hz)

* For STR-DB870, you can set this parameter only

when the center speaker is set to “NO”.

** STR-DB1070 only.

***Except for models of area code U, CA.

x Front speaker size (FRONT)

• If you connect large speakers that will

effectively reproduce bass frequencies, select

“LARGE”. Normally, select “LARGE”.

• If the sound is distorted, or you feel a lack of

surround effects when using multi channel

surround sound, select “SMALL” to activate

the bass redirection circuitry and output the

front channel bass frequencies from the sub

woofer.

• When the front speakers are set to “SMALL”,

the center, surround, and surround back

speakers are also automatically set to

“SMALL” (unless previously set to “NO”).

x Center speaker size (CENTER)

• If you connect a large speaker that will

effectively reproduce bass frequencies, select

“LARGE”. Normally, select “LARGE”.

However, if the front speakers are set to

“SMALL”, you cannot set the center speaker to

“LARGE”.

• If the sound is distorted, or you feel a lack of

surround effects when using multi channel

surround sound, select “SMALL” to activate

the bass redirection circuitry and output the

center channel bass frequencies from the front

speakers (if set to “LARGE”) or sub woofer.*

• If you do not connect a center speaker, select

“NO”. The sound of the center channel will be

output from the front speakers.*

• If you use the center speaker in the 2nd room,

select “2ND ROOM”. When the center speaker

is set to “2ND ROOM”, the surround back

speaker is also automatically set to “2ND

ROOM” (unless previously set to “NO”)

(STR-DB1070 area code U, CA only).

x Surround speaker size (SURROUND)

• If you connect large speakers that will

effectively reproduce bass frequencies, select

“LARGE”. Normally, select “LARGE”.

However, if the front speakers are set to

“SMALL”, you cannot set the surround

speakers to “LARGE”.

• If the sound is distorted, or you feel a lack of

surround effects when using multi channel

surround sound, select “SMALL” to activate

the bass redirection circuitry and output the

surround channel bass frequencies from the sub

woofer or other “LARGE” speakers.

• If you do not connect surround speakers, select

“NO”.*

Tip

*1–*3 correspond to the following Dolby Pro Logic

modes

*1 NORMAL

*2 PHANTOM

*3 3 STEREO

Multi channel surround setup

(continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DB1070 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info