Bedienungsanleitung Sony STR-DB1070 (Seite 47 von 68) (Englisch)

532259

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Other Operations

CONTROL A1 control

system

Getting Started

This section explains the basic functions

of the CONTROL A1 Control System.

Certain components have special

functions, like “CD Synchro Dubbing” on

cassette decks, that require CONTROL

A1 connections. For detailed information

regarding specific operations, be sure to

also refer to the Operating Instructions

supplied with your component(s).

The CONTROL A1 Control System was

designed to simplify the operation of audio

systems composed of separate Sony

components. CONTROL A1

connections

provide a path for the transmission of control

signals which enable automatic operation and

control features usually associated with

integrated systems.

Currently, CONTROL A1

connections

between a Sony CD player, amplifier

(receiver), MD deck and cassette deck provide

automatic function selection and synchronized

recording.

In the future, the CONTROL A1

connection

will work as a multifunction bus allowing you

to control various functions for each

component.

Notes

• The CONTROL A1 Control System is designed to

maintain upward compatibility as the Control

System is upgraded to handle new functions. In this

case, however, older components will not be

compatible with the new functions.

• Do not operate a 2 way remote control unit when

the CONTROL A1 jacks are connected via a PC

interface kit to a personal computer running “MD

Editor” or similar application. Also, do not operate

the connected component in a manner contrary to

the functions of the application, as this may cause

the application to operate incorrectly.

CONTROL A1 and CONTROL A1

compatibility

The CONTROL A1 control system has been

updated to the CONTROL A1 which is the

standard system in the Sony 300 disc CD changer

and other recent Sony components. Components

with CONTROL A1 jacks are compatible with

components with CONTROL A1 , and can be

connected to each other. Basically, the majority of

the functions available with the CONTROL A1

control system will be available with the

CONTROL A1 control system.

However, when making connections between

components with CONTROL A1 jacks and

components with CONTROL A1 jacks, the

number of functions that can be controlled may be

limited depending on the component. For detailed

information, refer to the operating instructions

supplied with the component(s).

Connections

Connect monaural (2P) mini-plug cords in

series to the CONTROL A1

jacks on the

back of each component. You can connect up

to 10 CONTROL A1

compatible components

in any order. However, you can connect only

one of each type of component (i.e., 1 CD

player, 1 MD deck, 1 tape deck and 1 receiver).

(You may be able to connect more than one CD

player or MD deck, depending on the model.

Refer to the operating instructions supplied

with the respective component for details.)

In the CONTROL A1

control system, the

control signals flow both ways, so there is no

distinction of IN and OUT jacks. If a

component has more than one CONTROL

jack, you can use either one, or connect

different components to each jack.

continued

Example

Amplifier

(Receiver)

player

deck

Tape

deck

Other

component

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DB1070 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info