Bedienungsanleitung Sony STR-DE675 (Seite 21 von 56) (Englisch)

601262

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Hooking Up and Setting Up the Speaker System

Checking the connections

After connecting all of your components to the receiver,

do the following to verify that the connections were made

correctly.

1 Press ?/1 to turn on the receiver.

2 Press a function button to select a component

(program source) that you connected (e.g., CD

player or tape deck).

3 Turn on the component and start playing it.

4 Rotate MASTER VOLUME to turn up the volume.

If you do not obtain normal sound output after

performing this procedure, look for the reason in the

checklist on the following page and take the appropriate

measures to correct the problem.

There is no sound no matter which component is

selected.

, Check that both the receiver and all components

are turned on.

, Check that the volume level on the display is not

set to VOL MIN by turning the MASTER

VOLUME.

, Check that the SPEAKERS button is not set to OFF.

, Check that all speaker cords are connected

correctly.

, Press the MUTING if MUTING appears on the

display.

, Check that the headphones are not connected to

the PHONES jack. No sound will come from the

speakers if the headphones are connected.

, Check that the receiver is not in “Demonstration

Mode” (see page 16).

Before You Use Your Receiver

Function buttons

MULTI CHANNEL DECODING

INPUT MODE

MUTING

VIDEO 1

MD/TAPE

VIDEO 2

DVD/LD

TUNER

TV/SAT

AUX

DISPLAY

DIMMER

PHONES

SPEAKERS

? / 1

MEMORY SHIFT FM MODE FM AM

SURR

LEVEL

SET UP

NAME

ENTER

A.F.D.

SOUND FIELD

MULTI CH IN

EQUALIZER

CINEMA STUDIO EX

MODE 2CH

PRESET

TUNING

–+–+

MASTER VOLUME

–

MASTER VOLUME

1/u

Notes

• The front balance, surround balance, center level, and surround

level are shown in the display during adjustment.

• Although these adjustments can also be made via the front

panel using the LEVEL menu (when the test tone is output, the

receiver switches to the LEVEL menu automatically), we

recommend you follow the procedure described above and

adjust the speaker levels from your listening position using the

remote control.

When setting the volume levels for each speaker

Let’s assume that you have matched the sound levels of all the

speakers using the test tone. Although this lays the foundation

for high quality surround sound, it may be necessary to make

further adjustments while listening to playback of actual

software. This is because most software contains center and

surround channels recorded at slightly lower levels than the two

front channels.

When you actually play back software recorded in multi channel

surround, you will notice that increasing the center and surround

speaker levels produces a better blend between the front and

center speakers and greater cohesion between the front and

surround speakers. Increasing the level of the center speaker

about 1 dB, and the surround speakers about 1~2 dB is likely to

produce better results.

In other words, in order to create a more cohesive soundstage

with balanced dialog, we recommend that you make some

adjustments while playing your software. Changes of only 1 dB

can make a huge difference in the character of the soundstage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE675 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info