Bedienungsanleitung Sony STR-DE685 (Seite 54 von 60) (Englisch)

601263

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Troubleshooting (continued)

There is no sound from the active sub woofer.

There is no sound output from the SUB WOOFER

terminal depending on the sound field (back page).

The surround effect cannot be obtained.

Make sure the sound field function is on (press

MODE).

Dolby Digital or DTS multi channel sound is not

reproduced.

• Check that the playing DVD, etc. is recorded in

Dolby Digital or DTS format.

• When connecting the DVD player, etc. to the

digital input jacks of this receiver, check the

audio setting (settings for the audio output) of the

connected component.

Recording cannot be done.

• Check that the components are connected

correctly.

• Select the source component with function

buttons.

• Make sure that INPUT MODE is set to

“ANALOG” before recording from a digital

component connected to the analog MD/TAPE

terminals.

• Make sure that INPUT MODE is set to “COAX

IN” or “OPT IN” (page 23) before recording

from a digital component connected to the

DIGITAL MD/TAPE OUT terminals.

To connect an LD player via an RF demodulator.

Connect the LD player to the RF demodulator,

then connect the RF demodulator’s optical or

coaxial digital output to the receiver’s jack. When

making this connection, be sure to set INPUT

MODE manually (page 23). The receiver may not

operate correctly if INPUT MODE is set to

“AUTO IN”.

For details on DOLBY DIGITAL RF hookups, see

the operating instructions supplied with your RF

demodulator.

There is no sound from one of the front

speakers.

Connect a pair of headphones to the PHONES jack

to verify that sound is output from the headphones

(page 24).

If only one channel is output from the headphones,

the component may not be connected to the

receiver correctly. Check that all the cords are fully

inserted into the jacks on both the receiver and the

component.

If both channels are output from the headphones,

the front speaker may not be connected to the

receiver correctly. Check the connection of the

front speaker which is not outputting any sound.

The left and right sounds are unbalanced or

reversed.

• Check that the speakers and components are

connected correctly and securely.

• Adjust balance parameters in the LEVEL menu.

There is severe hum or noise.

• Check that the speakers and components are

connected securely.

• Check that the connecting cords are away from a

transformer or motor, and at least 3 meters away

from a TV set or fluorescent light.

• Move your TV away from the audio components.

• The plugs and jacks are dirty. Wipe them with a

cloth slightly moistened with alcohol.

There is no sound or only a very low-level sound

is heard from the center or/and surround

speakers.

• Make sure the sound field function is on (press

MODE).

• Select a sound field containing the word

“C.ST.EX” (pages 25–26).

• Adjust the speaker level (page 22).

• Make sure the center or/and surround speaker

size parameter is set to either “SMALL” or

“LARGE” (page 19).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE685 Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info