Bedienungsanleitung Sony STR-DE695 (Seite 41 von 60) (Englisch)

601264

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Other Operations

STR-DE695 4-247-631-11 (1) US

Automatic function selection

When you connect a CONTROL A1II

compatible Sony amplifier (or receiver) to

other Sony components using monaural mini-

plug cords, the function selector on the

amplifier (or receiver) automatically switches

to the correct input when you press the play

button on one of the connected components.

Notes

• You must connect a CONTROL A1 compatible

amplifier (receiver) using a monaural mini-plug

cord in order to take advantage of the automatic

function selection feature.

• This function only works when the components are

connected to the amplifier (or receiver) inputs

according to the names on the function buttons.

Certain receivers allow you to switch the names of

the function buttons. In this case, refer to the

operating instructions supplied with the receiver.

• When recording, do not play any components other

than the recording source. It will cause the

automatic function selection to operate.

Synchronized recording

This function lets you conduct synchronized

recording between the selected source and

recorder components.

1 Set the function selector on the

amplifier (or receiver) to the source

component.

2 Set the source component to pause

mode (make sure both the N and X

indicators light together).

3 Set the recorder component to the

REC-PAUSE mode.

4 Press PAUSE on the recorder

component.

The source component is released from

the pause mode, and recording begins

shortly thereafter.

When playback ends from the source

component, recording stops.

Notes

• Do not set more than one component to the pause

mode.

• Certain recorder components may be equipped with

a special synchronized recording function that uses

the CONTROL A1II Control System, such as

“CD Synchro Dubbing”. In this case, refer to the

operating instructions supplied with the recorder

component.

CONTROL A1

Jacks and connection examples

CONTROL A1

CD player

MD deck

In the CONTROL A1II control system, the

control signals flow both ways, so there is no

distinction of IN and OUT jacks. If a

component has more than one CONTROL A1II

jack, you can use either one, or connect

different components to each jack.

On CONTROL A1 jacks and

connections

It is possible to make connections between

CONTROL A1 and CONTROL A1II jacks.

For details regarding particular connections or

set up options, refer to the operating

instructions supplied with the component(s).

About the connecting cord

Some CONTROL A1 compatible components

are supplied with a connecting cord as an

accessory. In this case, use the connecting cord

for your connection.

When using a commercially available cord, use

a monaural mini-plug cord less than 2 meters

long, with no resistance (such as the Sony

RK-G69HG).

Basic Functions

The CONTROL A1II functions will operate as

long as the component you want to operate is

turned on, even if all of the other connected

components are not turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE695 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info