Bedienungsanleitung Sony STR-DE695 (Seite 46 von 60) (Englisch)

601264

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

STR-DE695 4-247-631-11 (1) US

Notes

• Some functions explained in this section may not

work depending on the model of the receiver.

• The above explanation is intended to serve as an

example only. Therefore, depending on the

component the above operation may not be possible

or may operate differently than described.

• To activate the buttons with orange printing, press

ALT first before pressing the buttons.

• Press MAIN MENU on the remote before you use

the V/v/B/b buttons for receiver operation.

• Press TOP MENU/GUIDE or AV MENU on the

remote before you use the remote to control the

satellite tuner, VCR and DVD player.

• The TV/SAT, PHONO, SOURCE, DIRECT, AAC

BI-LING, 12 and ON SCREEN functions are not

available for set operation.

Selecting the command

mode of the remote

Set the remote command mode using the USE

MODE button and the remote command mode

buttons.

Selecting the command mode

You can switch the command mode (AV1 or

AV2) of the remote. If the command mode of

the receiver and the remote is different, you

cannot use the remote to operate the receiver.

Press AV1 or AV2 while pressing down

USE MODE.

The indicator lights once (twice for AV2) , then

the command mode switches.

To check the command mode of the

remote

Press USE MODE. You can check the remote

by the indicator.

Mode Indicator lights

AV1 once

AV2 twice

Remote Button Description

(continued)

To reset the remote to factory

settings

Press =/1, AV =/1, and MASTER VOL – at

the same time.

The indicator lights 3 times, then goes off.

Programming the remote

You can program the remote to control non-

Sony components by changing the code. Once

the control signals have been memorized, you

can use those components as part of your

system.

Furthermore, you can also program the remote

for Sony components that the remote is unable

to control. Note that the remote can only

control components that accept infrared

wireless control signals.

1 Press AV ?/1 while pressing down USE

MODE.

The indicator lights.

2 Press the input selector button

(including TV ?/1) for the component

you want to control.

For example, if you are going to control a

CD player, press CD/SACD.

3 Press the numeric buttons to enter the

numeric code (or one of the codes if

more than one code exists)

corresponding to the component and

the maker of the component you want

to control.

See the tables on pages 47–49 for

information on the numeric code(s)

corresponding to the component and the

maker of the component (the first digit and

the last two digits of the numeric code

correspond to the category and the maker’s

code respectively.)

4 Press ENTER.

Once the numeric code has been verified,

the indicator slowly flashes twice and the

remote automatically exits the programming

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE695 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info