Bedienungsanleitung Sony STR-DE698 (Seite 44 von 64) (Englisch)

601266

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

masterpage:Left

lename[D:\Sony SEM ju\DATA_STR-

E698_Revision3\J9050212_2560571131DE698_UCA\2560571131\GB070TH_STR-DE698-

CA.fm]

model name1[STR-DE698]

[2-560-571-13(1)]

Before you begin, make sure you have

connected all components properly.

Recording on an audio tape or

MiniDisc

You can record on a cassette tape or MiniDisc

using the receiver. See the operating instructions

of your cassette deck or MD deck if you need

help.

1 Select the component to be recorded.

2 Prepare the component for playing.

For example, insert a CD into the CD

player.

3 Insert a blank tape or MD into the

recording deck and adjust the

recording level, if necessary.

4 Start recording on the recording deck,

then start playback on the playback

component.

Notes

• You cannot record a digital audio signal using a

component connected to the analog MD/TAPE OUT

jacks. To record a digital audio signal, connect a

digital component to the DIGITAL OPTICAL

MD/TAPE OUT jacks.

• Sound adjustments do not affect the signal output

from the MD/TAPE OUT jacks.

• The analog audio signals of the current input is

output from the MD/TAPE OUT jacks.

• The signals input to the MULTI CH IN jacks are not

output from the MD/TAPE OUT jacks even when

MULTI CH IN is being used. The analog audio

signals of the current or previously used input are

output.

• Some sources contain copy guards to prevent

recording. In this case, you may not be able to record

from the sources.

Recording on a video tape

You can record from a VCR, a TV or a DVD

player using the receiver. You can also add

audio from a variety of audio sources when

editing a video tape. See the operating

instructions of your VCR or DVD player if you

need help.

1 Select the program source to be

recorded.

2 Prepare the component for playing.

For example, insert a video tape you want to

record into VCR.

3 Insert a blank video tape into the VCR

(VIDEO 1) for recording.

4 Start recording on the recording VCR,

then start playing the video tape or

DVD you want to record.

Tip

You can record the sound from any audio source onto

a video tape while copying from a video tape or DVD.

Locate the point where you want to start recording

from another audio source, select the program source,

then start playback. The audio from that source will be

recorded onto the audio track of the video tape instead

of the audio from the original medium. To resume

audio recording from the original medium, select the

video source again.

Notes

• You cannot record a digital audio signal using a

component connected to the analog VIDEO 1

AUDIO OUT jacks.

• Make sure to make both digital and analog

connections to the VIDEO 2 and DVD inputs.

Analog recording is not possible if you make only

digital connections.

• The analog audio signals of the current input are

output from the VIDEO 1 AUDIO OUT jacks.

• The signals input to the MULTI CH IN jacks are not

output from VIDEO 1 AUDIO OUT jacks even when

MULTI CH IN is being used. The analog audio

signals of the current or previously used input are

output.

Recording

GB01COV_STR-DE698-UCA.book Page 44 Wednesday, February 23, 2005 10:14 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE698 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info