Bedienungsanleitung Sony STR-DE698 (Seite 56 von 64) (Englisch)

601266

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

masterpage:Left

lename[D:\Sony SEM ju\DATA_STR-

E698_Revision3\J9050212_2560571131DE698_UCA\2560571131\GB09ADD_STR-DE698-

CA.fm]

model name1[STR-DE698]

[2-560-571-13(1)]

The surround effect cannot be obtained.

• Make sure the sound field function is on (press

MOVIE or MUSIC).

• Sound fields do not function for the signals with a

sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is

not reproduced.

• Check that the playing DVD, etc. is recorded in

Dolby Digital or DTS format.

• When connecting the DVD player, etc. to the

digital input jacks of this receiver, check the audio

setting (settings for the audio output) of the

connected component.

Recording cannot be done.

• Check that the components are connected

correctly.

• Select the source component with input buttons.

• Make sure that INPUT MODE is set to

“ANALOG” (page 37) before recording from a

digital component connected to the analog MD/

TAPE jacks.

• Make sure that INPUT MODE is set to “COAX

IN” or “OPT IN” (page 37) before recording from

a digital component connected to the DIGITAL

OPTICAL MD/TAPE OUT jack.

The FM reception is poor.

• Use a 75-ohm coaxial cable (not supplied) to

connect the receiver to an outdoor FM antenna as

shown below. If you connect the receiver to an

outdoor antenna, ground it against lightning. To

prevent a gas explosion, do not connect the ground

wire to a gas pipe.

Radio stations cannot be tuned in.

• Check that the antennas are connected securely.

Adjust the antennas and connect an external

antenna if necessary.

• The signal strength of the stations is too weak

(when tuning in with automatic tuning). Use direct

tuning.

• Make sure you set the tuning interval correctly

(when tuning in AM stations with direct tuning).

• No stations have been preset or the preset stations

have been cleared (when tuning by scanning

preset stations). Preset the stations (page 26).

• Press DISPLAY repeatedly so that the frequency

appears in the display.

RDS does not work.*

• Make sure that you are tuned to an FM RDS

station.

• Select a stronger FM station.

The RDS information that you want does not

appear.*

• Contact the radio station and find out whether they

actually provide the service in question. If so, the

service may be temporarily out of order.

There is no picture or an unclear picture

appears on the TV screen or monitor.

• Select the appropriate input on the receiver.

• Set your TV to the appropriate input mode.

• Move your audio components away from the TV.

• Connect your TV to the receiver using the same

type of connecting cord as the one used to connect

the receiver and video component (pages 8 and

11).

The DIGITAL OPTICAL MD/TAPE OUT jack

flashes red.

• When “AUTO IN” is selected for INPUT MODE,

the jack flashes red when no digital audio signal is

input. This depends on the INPUT MODE

function, and is not a malfunction.

* Models of area code CEL, CEK only.

ANTENNA

Receiver

To ground

Ground wire

(not supplied)

Outdoor FM antenna

GB01COV_STR-DE698-UCA.book Page 56 Wednesday, February 23, 2005 10:14 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE698 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info