Bedienungsanleitung Sony STR-DE997 (Seite 19 von 64) (Englisch)

601258

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Getting Started

masterpage:Right

lename[C:\Documents and

ettings\pc13\Desktop\J9031715_4255361111DE997U\4255361111\GB03CON_STR-DE997-

.fm]

model name1[STR-DE997]

[4-255-361-11(1)]

•NO

If you did not connect a center speaker, select

“NO”. The sound of the center channel will be

output from the front speakers.

x SURR SP XXXXX

(Surround speakers size)

• LARGE

If you connect large speakers that will

effectively reproduce bass frequencies, select

“LARGE”. Normally, select “LARGE”.

However, if the front speakers are set to

“SMALL”, you cannot set the surround

speakers to “LARGE”.

•SMALL

If the sound is distorted, or you feel a lack of

surround effects when using multi channel

surround sound, select “SMALL” to activate

the bass redirection circuitry and output the

surround channel bass frequencies from the

sub woofer or other “LARGE” speakers.

•NO

If you did not connect surround speakers,

select “NO”.

x SB SP XXXXXX

(Surround back speakers selection)

When the surround speakers size parameter is

set to “NO”, the surround back speakers

selection parameter is also automatically set to

“NO” and the setting cannot be changed.

• DUAL

If you connect two surround back speakers,

select “DUAL”. The sound will be output to a

maximum of 7.1 channels.

•SINGLE

If you connect only one surround back

speaker, select “SINGLE”. The sound will be

output to a maximum of 6.1 channels.

•NO

If you did not connect surround back

speakers, select “NO”.

Tips

• a)–c) correspond to the following Dolby Pro Logic

modes

a) NORMAL

b) PHANTOM

c) 3 STEREO

• The “LARGE” and “SMALL” settings for each

speaker determine whether the internal sound

processor will cut the bass signal from that channel.

When the bass is cut from a channel, the bass

redirection circuitry sends the corresponding bass

frequencies to the sub woofer or other “LARGE”

speakers.

However, since bass sounds have a certain amount of

directionality, it is best not to cut them, if possible.

Therefore, even when using small speakers, you can

set them to “LARGE” if you want to output the bass

frequencies from that speaker. On the other hand, if

you are using a large speaker, but prefer not to have

bass frequencies output from that speaker, set it to

“SMALL”.

If the overall sound level is lower than you prefer, set

all speakers to “LARGE”. If there is not enough bass,

you can use the BASS parameter in the

EQUALIZER menu to boost the bass levels. To

adjust the bass, see page 38.

x FRONT DIST. XX ft.

(Front speaker distance)

Initial setting: 10 ft.

Lets you set the distance from your listening position

to the front speakers (A). You can adjust from 3 to 23

feet in 1 foot steps.

If both front speakers are not placed an equal distance

from your listening position, set the distance to the

closest speaker.

When placing only one surround back speaker

30˚30˚

100˚-120˚100˚-120˚

continued

GB01COV_STR-DE997-U.book Page 19 Friday, April 2, 2004 11:00 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-DE997 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info