Bedienungsanleitung Sony STR-KSL40 (Seite 38 von 44) (Englisch)

652508

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

HT-SL55 4-247-583-12(1) GB

Troubleshooting (continued)

There is no sound from a specific component.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the

receiver and the component.

• Check that you have selected the correct

component on the receiver.

There is no sound from one of the front

speakers.

• Check that the component is connected correctly

to the audio input jacks for that component.

• Check that the cord(s) used for the connection is

(are) fully inserted into the jacks on both the

receiver and the component.

The multi channel surround effect of the Dolby

Digital or DTS is not obtained.

• Check that the DVD software, etc. is recorded in

Dolby Digital or DTS format.

• If you connect the DVD player, etc. to the digital

input jack on this system, check the audio setting

(for digital audio output) of the component.

• Check that the audio track is correctly selected

on the DVD player. (Check the audio setting of

the DVD menu.)

The left and right sounds are unbalanced or

reversed.

• Check that the speakers and components are

connected correctly and securely.

• Adjust balance parameters in the LEVEL menu.

There is severe hum or noise.

• Check that the speakers and components are

connected securely.

• Check that the connecting cords are away from a

transformer or motor, and at least 3 meters away

from a TV set or fluorescent light.

• Move your TV away from the audio components.

• The plugs and jacks are dirty. Wipe them with a

cloth slightly moistened with alcohol.

There is no sound or only a very low-level sound

is heard from the center or/and surround

speakers.

• Make sure the sound field function is on (press

SOUND FIELD +/–).

• Select a sound field containing the word

“C.ST.EX” (page 21).

• Adjust the speaker level (page 18).

• Make sure the center or/and surround speaker

size parameter is set to “SMALL” or “LARGE”

(page 17).

There is no sound from the active sub woofer.

• When you select NORM. SP., make sure the sub

woofer is set to “YES” (see page 14).

• Check that the sub woofer is connected correctly

and securely.

• There is no sound output from the SUB

WOOFER terminal depending on the sound field

(back page).

The FM reception is poor.

Use a 75-ohm coaxial cable (not supplied) to

connect the receiver to an outdoor FM antenna as

shown below. If you connect the receiver to an

outdoor antenna, ground it against lightning. To

prevent a gas explosion, do not connect the ground

wire to a gas pipe.

Outdoor FM antenna

Receiver

Ground wire

(not supplied)

To ground

Ω

COAXIAL

ANTENNA

GB10ADD_HT-SL55.p65 28/4/2003, 11:58 AM38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony STR-KSL40 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony STR-KSL40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info