Bedienungsanleitung Sony TCWE635 (Seite 12 von 24) (Englisch)

29656

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Advanced Recording Operations

AUTO indicator

Adjusting the Recording Level

Automatically (Auto Rec Level)

The Auto Rec Level function automatically measures

the peak signal level and adjusts the recording level

accordingly. The Auto Rec Level function operates

during normal recording, Relay Recording or

Simultaneous Recording on either deck.

PAUSE P REC r·p

ARL

REC LEVEL

ª·

)

§§

Rr PRr

ª·

)

•

1 Follow Steps 1 to 3 of “Recording on a Tape” on

page 6.

Make sure that record-protect tabs on the cassette

have not been removed.

2 Press REC r.

The AUTO indicator flashes and the deck

automatically adjusts the recording level. The

AUTO indicator lights up continuously after the

recording level has been adjusted.

3 Press PAUSE P or ·.

Recording starts.

To cancel the Auto Rec Level function

Press ARL or turn REC LEVEL to turn off the AUTO

indicator. If you do either of these during recording,

recording will continue but with the Auto Rec Level

function turned off.

To stop recording

Press p.

z How the Auto Rec Level function adjusts the

recording level

While the AUTO indicator is flashing, the deck sets the

recording level as high as possible without causing

distortion. If the signal level rises excessively after the

start of recording, the deck gradually decreases the

recording level.

z You should adjust the recording level manually with

the REC LEVEL control in the following cases:

• The recording level cannot be adjusted properly due

to excessive noise in the program source.

• The program source level is too low and the

recording level does not increase.

During a quiet passage in a program source such as

classical music, the recording level may not increase

for some time. If a high sound level is expected later

on in the track, play that portion first so that the right

adjustment can be obtained.

• The recording level does not decrease for a long time.

The Auto Rec Level function may not work properly

when you try to record sound produced by a graphic

equalizer that has extremely high-level signals.

z To record with the optimum recording level

• To prevent changes in the recording level after

recording starts, press REC r while playing the

highest sound level portion of the program source to

be recorded. The result is a more natural-sounding

recording.

• If you play the entire program source after the AUTO

indicator has stopped flashing and is lit continuously,

the deck will set the recording level for the portion of

the program source with the highest signal level.

z Recording level setting remains even after the

recording has ended

After you have finished recording with the Auto Rec

Level function, the AUTO indicator remains on and the

recording level setting remains the same. To cancel the

setting, do one of the following:

• Press ARL to turn off the AUTO indicator

• Turn REC LEVEL

• Turn the deck off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony TCWE635 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info