Bedienungsanleitung Sony TCWE835S (Seite 22 von 24) (Englisch)

29670

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Additional Information

Glossary

ATS

Automatic Tape Selection. The tape deck automatically sets

the appropriate equalization characteristics and bias current

according to the type of tape inserted in the deck.

Automatic calibration

The automatic adjustment of the bias current and recording

level for the inserted tape.

This adjustment works together with the deck’s ATS

(Automatic Tape Selection, see above) to get the best

possible recording results on any tape.

Auto Rec Level function

A function that automatically sets the recording level

according to the peak signal level of the program source

prior to recording.

When active, this function gradually decreases the recording

level when the signal level rises excessively during

recording.

Dolby HX Pro

A system that reduces distortion, and increases high-

frequency headroom during recording. A tape recorded

with this system produces the same high-quality sound even

when played on other tape decks.

Dolby NR (noise reduction)

A system that eliminates tape hiss noise by boosting low-

level signals in the high-frequency range during recording,

then lowering them during playback.

There are four types: A, B, C and S (TC-WE835S only). Type

A is for professional use (and is not available on your tape

deck), and types B, C and S are for consumer use. Type S

has the maximum noise reduction capability, followed by

types C and B.

Multi-AMS

Multi-Automatic Music Sensor is a function that locates the

beginning of up to 30 tracks before or after the current track

by detecting the blank space (of over 4 seconds) between

tracks.

Multiplex filter

A filter for eliminating the 19-kHz stereo carrier and the

38-kHz sub-carrier signals that may impair the Dolby NR

system. Though tuners are usually equipped with this filter,

if you got poor results when recording FM broadcasts with

the Dolby NR, your tuner may not have a filter or the filter

may not be working. In this case, set the DOLBY NR selector

on the tape deck to ON FILTER.

Test tones

Signals (10-kHz and 400-Hz) generated by the tape deck for

bias current and recording level calibration.

Index

A, B

Accessories

optional 21

supplied 4

Adjusting

recording level automatically. See Auto rec

level

recording level manually 7

volume 5

ATS 11, 22

Audio connecting cord 4

Auto play 8

Automatic Music Sensor. See Multi-AMS

Automatic calibration 11, 22

Automatic Tape Selection. See ATS

Auto rec level 12, 22

Cassette. See Tape

CD synchro-recording

through a control A1 cord 16

using a remote 17

Cleaning

cabinet 18

heads and tape path 19

Connecting. See Hooking up

Control A1 cord 4, 16

D, E, F, G

Difference between the models 2

Dolby HX Pro 7, 22

Dolby NR 5, 7, 22

Dubbing

high-speed dubbing 13

normal-speed dubbing 13

only specific portions 14

RMS dubbing 15

Fader 13

Fading

in. See Fader

out. See Fader

FILTER. See Multiplex filter

H, I, J, K

Heads

cleaning 19

demagnetizing 19

High-speed

fast-forwarding function 5

rewinding function 5

Hooking up

hookups 4

overview 4

Insert

blank space 16

cassette 5, 6

Locating

beginning of the tape 8

particular point 8

tracks 8

Index

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony TCWE835S Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info