Bedienungsanleitung Sony UVW-1800 (Seite 79 von 83) (Englisch, Französisch)

578059

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

A/B roll edit

An edit in which two or more players are used to

create special effects such as dissolve and wipe, and

one recorder is used to record the results of the edit.

Using an editing controller allows efficient control c

the VTRs and very precise editing.

B-Y signal

A chrominance signal determined by subtracting the

Y (luminance) signal from the B (blue) signal. One

of the component signals.

Bridging connection

A connection which allows a signal input to an inpu

terminal to pass through the unit and exit from an

output terminal as input to external equipment. Aisc

called loop-through connection.

Capstan

A drive mechanism that moves the tape at a specific

speed. Its rotation normally synchronizes with a

reference sync signal.

Chrominance signal

Color signal containing color information such as

hue and saturation. Also called C signal.

Color frame

The color subcarrier phase, whose one cycle consist;

of two frames (four fields) in NTSC format and four

frames (eight fields) in PAL format.

Color framing

Maintenance of continuity in the color subcarrier

phase between one frame and the next, for the

purpose of avoiding noise on the picture.

Component signal

A video signal consisting of a luminance signal (Y)

and two chrominance signals (R-Y, B-Y).

Composite signal

A composite video signal containing video, burst am

sync signals.

CTL

Abbreviation of control signal. A pulse signal

recorded on a longitudinal track of the tape in units of

fields. Counting this signal allows the number of

frames to be used to display the tape running time. It

is also used as a control signal to adjust the

relationship between the scanning position of the

video heads and tape movement during playback to

match that during recording.

Drop frame mode

In NTSC format, the actual number of frames per

second is approximately 29.97, while that for the

time code is specified as 30. Drop frame mode is a

mode in which the time code is advanced in such a

way that the difference in frame value between real

time and the time codes is corrected. In this mode,

two frames are skipped at the beginning of each

minute, except for every tenth minute, so that the

frame value for time codes matches that for real time.

EE mode

Abbreviation of Electric to Electric mode. Video and

audio signals are supplied to the VTRs internal

circuits, but not to the recording heads.

External synchronization

Synchronization of the signals and tape transport of a

VTR with those of a reference VTR.

IRE

A unit for expressing video level as determined by

the Institute of Radio Engineers (now called the

Institute of Electrical and Electronic Engineers).

LNG recording

Abbreviation of longitudinal recording. A method of

recording audio signals by radio frequency bias

method on the longitudinal track of the tape using the

fixed head.

LTC

Abbreviation of Longitudinal Time Code. A time

code recorded in a separate track at the edge of the

tape.

A-6 (E) Appendixes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony UVW-1800 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info