Bedienungsanleitung Sony Vegas Movie Studio HD Platinum 10.0 (Seite 56 von 62) (Englisch)

474753

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Assigning tracks to surround channels

Each track can be assigned to the front, center, LFE, or rear channels, or you can pan a track freely within the soundfield.

Right-click the surround panner in the track header and choose a command from the shortcut menu to choose a surround pan

mode:

Mode Function

Surround Pan Used to pan a track anywhere among the front, center, LFE, or rear channels. Drag the orange pan

point in the surround panner to indicate where the track’s audio should be sent.

You can use a pan envelope to automate left/right panning (front/rear panning cannot be

automated).

Front Only Used for the front-left and front-right channels. You can use a pan envelope to pan between the

right and left channels.

Center Only Used for the center channel. No panning is available.

LFE Only Used for the low-frequency effects channel (subwoofer). No panning is available.

Rear Only Used for the rear-left and rear-right channels. You can use a pan envelope to pan between the

right and left channels.

Panning a track

You can perform surround panning using any of the following methods:

• Assign a track to the front, center, LFE, or rear channels. When a track is assigned to a channel, its audio output is sent to the

selected channel. For more information, see Assigning tracks to surround channels on page 50.

• If a track is set to Front, Rear, or Surround Pan mode, you can use a pan envelope to adjust left/right panning. Pan envelopes

are not used when a track is set to Center or LFE mode.

• If a track is not set to Front, Center, LFE, or Rear mode, use the surround panner in the track header.

Panning a track in Surround Pan mode

Drag the orange pan point in the surround panner window to position the sound within the soundfield.

You can drag the orange pan dot to any position

in the soundfield.

The Voice track is panned near the center.

The Music track is panned to the left-front

speaker.

The Sound Effects track is panned to the right-

rear speaker.

Tips:

• Double-click the pan point to reset it to the center listening position.

• Keyboard and mouse shortcuts can help you position the pan point quickly and accurately. For more information about keyboard

shortcuts, see the online help (from the Vegas Movie Studio Help menu, choose Contents and Index).

Automating panning with envelopes

If a track is set to Front, Rear, or Surround Pan mode, you can use a pan envelope to adjust left/right panning.

Select the track you want to pan.

From the Insert menu, choose Audio Envelopes, and then choose Pan from the submenu.

Add points and adjust the envelope set edit panning throughout the track.

The pan envelope is added to the left/right position of the pan point (front/rear panning cannot be automated).

For example, if a track’s pan point is set to 10% left and the pan envelope point is set to 10% right, the sound will be played

through the center at the envelope point.

For more information about adjusting envelopes, see the online help (from the Vegas Movie Studio Help menu, and choose

Contents and Index).

| CHAPTER 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony Vegas Movie Studio HD Platinum 10.0 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info