Bedienungsanleitung Sony VPD-MX10 (Seite 28 von 128) (Englisch, Französisch, Spanisch)

475873

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

The INPUT SETTING Menu

SIZE H

Adjusts the horizontal size of picture input

from the INPUT A connector. The higher

the setting, the larger the horizontal size of

the picture. The lower the setting, the

smaller the horizontal size of the picture.

Adjust the setting according to the dots of

the input signal.

For details on the suitable value for the

preset signals, see page 41.

SHIFT

Adjusts the position of the picture. H adjusts

the horizontal position of the picture.V

adjusts the vertical position of the picture.

As the setting for H increases, the picture

moves to the right, and as the setting

decreases, the picture moves to the left.

As the setting for V increases, the picture

moves up, and as the setting decreases, the

picture moves down. Use the < or the ,

key to adjust the horizontal position and the

M and m key for the vertical position.

SCAN CONV (Scan converter)

Converts the signal to display the picture

according to the screen size.

ON: Displays the picture according to the

screen size. The picture will lose some

clarity.

OFF: Displays the picture while matching

one pixel of input picture element to that

of the DMD

. The picture will be clear

but the picture size will be smaller.

When XGA or SXGA signal is input, this item

will not be displayed.

ASPECT

Sets the aspect ratio of the picture. When

inputting 16:9 (squeezed) signal from

equipment such as a DVD player, set to

16:9.

4:3: When the picture with ratio 4:3 is input.

16:9: When the picture with ratio 16:9

(squeezed) is input.

This projector has 37 types of preset data for

input signals (the preset memory). When a

preset signal is input, the projector

automatically detects the signal type and

recalls the data for the signal from the preset

memory to adjust it to an optimum picture.

The memory number and signal type of that

signal are displayed in the INPUT

SETTING menu. You can also adjust the

preset data through the INPUT SETTING

menu.

This projector has 20 types of user memories

for INPUT-A into which you can save the

setting of the adjusted data for an unpreset

input signal.

When an unpreset signal is input for the first

time, a memory number is displayed as 0.

When you adjust the data of the signal in the

INPUT SETTING menu, it will be

registered to the projector. If more than 20

user memories are registered, the newest

memory always overwrites the oldest one.

See the chart on page 41 to find if the signal

is registered to the preset memory.

Since the data is recalled from the preset

memory about the following signals, you

can use these preset data by adjusting SIZE

H. Make fine adjustment by adjusting

SHIFT.

When the aspect ratio of input signal is other

than 4:3, a part of the screen is displayed in

black.

Note

About the Preset Memory No.

Signal Memory No. SIZE

Super Mac-2 23 1312

SGI-1 23 1320

Macintosh 19" 25 1328

Macintosh 21" 27 1456

Sony News 36 1708

PC-9821

1280 × 1024

36 1600

WS Sunmicro 37 1664

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony VPD-MX10 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony VPD-MX10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info