Bedienungsanleitung Sony vpl fx52l (Seite 12 von 57) (Englisch)

214550

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

12 Location and Function of Controls

b Arrow keys (M/m/</,)

Used to adjust focus, zoom and shift, or

to move the cursor or make various

adjustments in the menu.

c Indicators

TEMP (Temperature)/FAN

• Lights up when temperature inside the

projector becomes unusually high.

• Flashes when the fan is broken.

LAMP/COVER

• Lights up when the lamp has reached

the end of its life or becomes a high

temperature.

• Flashes when the lamp cover or air

filter is not secured firmly.

POWER SAVING

Lights up when the projector is in the

power saving mode. When “Power

Saving” in the SET SETTING menu is

set to ON, the projector goes into the

power saving mode if no signal is input

for 10 minutes. Although the lamp goes

out, the cooling fan keeps running. In the

power saving mode, any key does not

function for the first 40 seconds. The

power saving mode is canceled when a

signal is input or any key is pressed.

ON/STANDBY

• Lights in red when the AC power cord

is plugged into the wall outlet. Once in

the standby mode, you can turn on the

projector with the I / 1 key.

• Lights in green when the power is

turned on.

• Flashes in green from the projector is

turned on until the projector is ready to

operate. Also, flashes in green while

the cooling fan is cooling after the

power is turned off with the I / 1 key.

The fan runs for about 120 seconds

after the power is turned off.

• The ON/STANDBY indicator flashes

quickly for the first 40 seconds.

During this time, you cannot light up

the ON/STANDBY indicator with the

I / 1 key.

For details on the LAMP/COVER and

the TEMP/FAN indicators, See page 47.

d I / 1 (on / standby) key

Turns on the projector when the

projector is in the standby mode. The

ON/STANDBY indicator lights in green

when the power is turned on.

When turning off the power, press the I /

1 key twice following the message on

the screen, or press and hold the key for

about one second.

For details on steps for turning off the

power, see “To turn off the power” on

page 27.

e INPUT key

Selects the input signal. Each time you

press the key, the input signal switches

as follows:

f APA (Auto Pixel Alignment) key

Pressing this key while a signal from a

computer is being input automatically

adjusts the picture so that it can be seen

clearly. This function also

simultaneously adjusts the screen size

and makes up/down and left/right shift

adjustments.

Press the APA key when the full image is

displayed on the screen. If the projected

image includes a large black area around

the periphery, the APA function will not

function properly and in some cases,

portions of the image may not be

displayed.

• You can cancel the adjustment by

pressing the APA key again while

“Adjusting” appears on the screen.

• The picture may not be adjusted properly

depending on the kinds of input signals.

• Adjust the items “Dot Phase,” “H Size”

and “Shift” in the INPUT SETTING

menu when you adjust the picture

manually.

g MENU key

Displays the on-screen menu. Press

again to clear the menu.

Note

t INPUT A t INPUT B t INPUT C t

S VIDEO T VIDEO T

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony vpl fx52l Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info