Bedienungsanleitung Sony vpl fx52l (Seite 33 von 57) (Englisch)

214550

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

The INPUT SETTING Menu

Adjustments and Settings Using the Menu

an infringement of the rights of authors or

producers, which are legally protected.

Adjust Signal... Menu Items

Dot Phase

Adjusts the dot phase of the LCD panel and

the signal output from a computer.

Adjust the picture further for finer picture

after the picture is adjusted by pressing the

APA key.

Adjust the picture to where it looks clearest.

H Size

Adjusts the horizontal size of picture output

from a connector. The higher the setting, the

larger the horizontal size of the picture. The

lower the setting, the smaller the horizontal

size of the picture. Adjust the setting

according to the dots of the input signal.

For details on the suitable value for the

preset signals, see page 53.

Shift

Adjusts the position of the picture. H adjusts

the horizontal position of the picture. V

adjusts the vertical position of the picture.

As the setting for H increases, the picture

moves to the right, and as the setting

decreases, the picture moves to the left.

As the setting for V increases, the picture

moves up, and as the setting decreases, the

picture moves down. Use the < or the ,

key to adjust the horizontal position and the

M and m key for the vertical position.

Scan Converter

Converts the signal to display the picture

according to the screen size.

On: Displays the picture according to the

screen size. The picture will lose some

clarity.

Off: Displays the picture while matching

one pixel of input picture element to that

of the LCD. The picture will be clear but

the picture size will be smaller.

When XGA, SXGA, SXGA+ or UXGA signal

is input, this item will not be displayed.

This projector has 46 types of preset data for

input signals (the preset memory). When a

preset signal is input, the projector

automatically detects the signal type and

recalls the data for the signal from the preset

memory to adjust it to an optimum picture.

The memory number and signal type of that

signal are displayed in the INFORMATION

menu (See page 36). You can also adjust the

preset data through the INPUT SETTING

menu.

This projector has 20 types of user memories

into which you can save the setting of the

adjusted data for an unpreset input signal.

When an unpreset signal is input for the first

time, a memory number is displayed as 0.

When you adjust the data of the signal in the

INPUT SETTING menu, it will be

registered to the projector. If more than 20

user memories are registered, the newest

memory always overwrites the oldest one.

See the chart on page 53 to find if the signal

is registered to the preset memory.

Since the data is recalled from the preset

memory about the following signals, you

can use these preset data by adjusting “H

Size.” Make fine adjustment by adjusting

“Shift.”

When the aspect ratio of input signal is other

than 4:3, a part of the screen is displayed in

black.

Note

About the Preset Memory No.

Signal Memory No. SIZE

Super Mac-2 23 1,312

SGI-1 23 1,320

Macintosh 19" 25 1,328

Macintosh 21" 27 1,456

Sony News 36 1,708

PC9821

1,280 × 1,024

36 1,600

WS Sunmicro 37 1,664

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony vpl fx52l Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info