Bedienungsanleitung Sony VPL-HS2 (Seite 26 von 132) (Englisch, Französisch, Spanisch)

752752

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

GB 26 Menu Lists

Using the Menus

INPUT SETTING

Black Level

Adj (Adjust) Emphasizes black color to produce a

bolder “dynamic” picture. Set according

to the input signal source.

High: Gives higher emphasis to the black

color.

Low: Gives lower emphasis to the black

color.

Off: Cancels this feature.

Gamma Mode Graphics: Reproduces the photos in

natural tones.

Text: Contrasts black and white. Suitable

for images that contain lots of text.

Color Temp. High: Gives the white colors a blue tint.

Middle: Gives the white colors a neutral

tint.

Low: Gives the white colors a red tint.

DDE

(Dynamic

Detail

Enhancer)

Off: Plays a video signal in an interlace

format without converting.

Progressive: Converts an interlace format

video signal to a progressive format.

Film: Normally, select this option.

Reproduces the 2-3 Pull-Down film

sources with smooth picture movement.

When the video signal with a format

other than the 2-3 Pull-Down is input,

“Progressive” is automatically selected.

Cinema Black Switches the lamp wattage during

projection.

On: Enhances the black by reducing the

lamp wattage.

Off: Normal wattage.

Tip

If “Cinema Black” is set to “On,” the next time

the power is turned on, the lamp will use the

“Off” setting for the first time, and then go to

“On.”

Item Description

Adjust Signal…

Dot Phase Adjusts the picture from a computer for

clearer picture after it is adjusted by

pressing the APA button.

H Size Adjusts the horizontal size of the picture

from a computer. The higher the setting,

the wider the picture. The lower the

setting, the narrower the picture.

Shift As the setting for H (horizontal)

increases, the picture moves to the right,

and as the setting decreases, the picture

moves to the left. Use < or , to adjust

the horizontal position.

As the setting for V (vertical) increases,

the picture moves up, and as the setting

decreases, the picture moves down. Use

M or m to adjust the vertical position.

Item Description

Wide Mode You can select the 4:3 aspect ratio picture

mode, “Normal” and “Normal Through,”

and 16:9 aspect ratio picture mode,

“Full,” “Wide Zoom,” “Zoom,” “Subtitle”

and “Full Through.”

Full: The 16:9 squeezed* picture is

diplayed with the correct aspect. The

4:3 picture is enlarged horizontally to

fit the 16:9 screen.

* squeezed: An original 16:9 aspect

ratio picture is recorded horizontally

compressed to be a 4:3 picture.

Normal: The picture with normal 4:3

aspect ratio is displayed to fill the

vertical screen size.

Wide Zoom: The picture with 4:3 aspect

ratio is enlarged and the upper and

lower portions of the picture are

compressed to fit the 16:9 screen. Use

this mode to view news, variety shows,

etc.

Zoom: The normal 4:3 aspect ratio

picture is enlarged verticall and

horizontally at the equal ratio to fill the

16:9 screen. The mode is ideal for

viewing a wide-format movie.

Subtitle: The subtitle area is compressed

and displayed at the lower part of the

screen. Use this mode to view a movie

with the subtitle.

Full Through: One-to-one mapping is

done on a squeezed 16:9 picture. It is

displayed in the center of the screen.

Normal Through: One-to-one mapping

is done on the picture with 4:3 aspect

ratio. It is displayed in the center of the

screen.

Note

If “Full Through” or “Normal Through” is

selected when a video (50 Hz) or progressive

video (50p) signal is input, the picture may not

be completely displayed on the screen due to the

number of dots of the LCD panel.

For details, see “Selecting the Wide

Screen Mode” on page 20.

V Position Adjusts the vertical position of the picture

in wide screen mode. As the setting

increases, the picture moves up. As the

setting decreases, the picture moves

down.

Note

This item is adjustable only when “Zoom” or

“Subtitle” is selected, or when “Full Through”

or “Normal Through” is selected for video

(50Hz) or progressive component (50p) input

signal.

Title Area Adjusts the subtitle area. As the setting

increases, the subtitle area moves up. As

the setting decreases, the subtitle area

moves down.

Note

This item is adjustable only when “Subtitle” is

selected.

Item Description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony VPL-HS2 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony VPL-HS2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info