Bedienungsanleitung Sony vpl px15 (Seite 30 von 128) (Englisch, Französisch, Spanisch)

214316

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

30 (GB)

SIZE H

Adjusts the horizontal size of the picture input from

the INPUT A/B connector.

The higher the setting, the larger the horizontal size of

the picture.

The lower the setting, the smaller the horizontal size

of the picture. Adjust the setting according to the dots

of the input signal.

For details on a suitable value for preset signals, see page

31 (GB).

SHIFT

Adjusts the position of the picture input from the

INPUT A/B connectors or video input connectors.

H adjusts the horizontal position of the picture.

V adjusts the vertical position of the picture.

As the setting for H increases, the picture moves to

the right, and as the setting decreases, the picture

moves to the left.

As the setting for V increases, the picture moves up,

and as the setting decreases, the picture moves down.

Use the < or , key to adjust the horizontal position

and the M or m key for the vertical position.

ASPECT

Sets the aspect ratio of the picture.

When inputting a 16:9 (squeezed) signal from

equipment such as a DVD player, set this to 16:9.

4:3 : When a picture with a ratio of 4:3 is input.

16:9 : When a picture with a ratio of 16:9 (squeezed)

is input.

SCAN CONV (Scan converter)

Converts the signal to display the picture according to

the screen size.

ON: Displays the picture according to the screen

size. The picture will lose some clarity.

OFF: Displays the picture while matching one pixel

of the input picture element to that of the LCD.

The picture will be clear but the picture size will

be smaller.

Note

This item will not be displayed in the following cases.

VPL-PX15/PX10: When an XGA or SXGA signal is

input.

VPL-PS10: When an SVGA, XGA or SXGA signal is

input.

Input signals and adjustable/setting items

Item Input signal

Video or Video GBR RGB

S video (Y/C)

Component

DOT – – –

PHASE

SIZE H – – –

SHIFT

ASPECT –

SCAN – – –

CONV

: Adjustable/can be set

– : Not adjustable/can not be set

1) The RGB signals of a computer

2) VPL-PX15/PX10: lower than SVGA only; VPL-PS10:

lower than VGA only

About the preset memory No.

This projector has 37 kinds of preset data for input

signals (the preset memory). The memory number of

the current input signal and the signal type are

displayed when the preset signal is input. This

projector automatically detects the signal type. When

the signal has been registered in the preset memory, a

suitable picture is displayed on the screen according to

the signal type. You can adjust the picture through the

INPUT SETTING menu.

This projector also has 20 kinds of user memories for

each INPUT A/B. When an unpreset signal is input

for the first time, the memory number is displayed as

0. If the input signal is adjusted in the INPUT

SETTING menu, the setting made via INPUT A/B is

stored. When more than 20 user memory items are

registered for each INPUT A/B, the newest memory

item is automatically stored over the oldest one.

The INPUT SETTING Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony vpl px15 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info