Bedienungsanleitung Sony VPLVW12HT (Seite 7 von 148) (Spanisch)

28640

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

7 (GB)

Precautions

On safety

•Check that the operating voltage of your unit is

identical with the voltage of your local power

supply.

• Should any liquid or solid object fall into the cabinet,

unplug the unit and have it checked by qualified

personnel before operating it further.

•Unplug the unit from the wall outlet if it is not to be

used for several days.

• To disconnect the cord, pull it out by the plug. Never

pull the cord itself.

• The wall outlet should be near the unit and easily

accessible.

• The unit is not disconnected to the AC power source

(mains) as long as it is connected to the wall outlet,

even if the unit itself has been turned off.

• Do not look into the lens while the lamp is on.

•Do not place your hand or objects near the

ventilation holes — the air coming out is hot.

• Be careful not to catch your fingers with the

adjusters when you lift up the projector. Do not

push hard on the top of the projector with the

adjusters out.

On illumination

• To obtain the best picture, the front of the screen

should not be exposed to direct lighting or sunlight.

•Ceiling-mounted spot lighting is recommended. Use

a cover over fluorescent lamps to avoid lowering the

contrast ratio.

•Cover any windows that face the screen with opaque

draperies.

• It is desirable to install the projector in a room where

floor and walls are not of light-reflecting material. If

the floor and walls are of reflecting material, it is

recommended that the carpet and wall paper be

changed to a dark color.

On preventing internal heat build-up

After you turn off the power with the

key on the

Remote Commander or the I /

key on the control

panel, do not disconnect the unit from the wall outlet

while the cooling fan is still running.

Do not block ventilation holes

The projector is equipped with ventilation holes

(intake) on the bottom and ventilation holes (exhaust)

on the front. Do not block or place anything near

these holes, or internal heat build-up may occur,

causing picture degradation or damage to the

projector.

On cleaning

•To keep the cabinet looking new, periodically clean

it with a soft cloth. Stubborn stains may be removed

with a cloth lightly dampened with a mild detergent

solution. Never use strong solvents, such as thinner,

benzene, or abrasive cleansers, since these will

damage the cabinet.

•Avoid touching the lens. To remove dust on the lens,

use a soft dry cloth. Do not use a damp cloth,

detergent solution, or thinner.

On repacking

Save the original shipping carton and packing

material; they will come in handy if you ever have to

ship your unit. For maximum protection, repack your

unit as it was originally packed at the factory.

About the LCD projector

•The LCD projector is manufactured using high-

precision technology. You may, however, see tiny

black points and/or bright points (red, blue, or green)

that continuously appear on the LCD projector. This

is a normal result of the manufacturing process and

does not indicate a malfunction.

•Air polluted by tobacco smoke, etc., may have a

negative effect on the projector.

Be sure to avoid tobacco smoke, etc., from directly

getting in to this unit.

Ventilate well when using this unit in a closed room.

Precautions

Overview

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony VPLVW12HT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony VPLVW12HT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info