Bedienungsanleitung Sony VPLVW12HT (Seite 12 von 148) (Spanisch)

28640

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

12 (GB)

Location and Function of Controls

Control Panel

(

on / standby

)

key

Turns the projector on and off when the projector is in

the standby mode. (When the projector is in the

standby mode, the ON/STANDBY indicator lights in

red.) The ON/STANDBY indicator lights in green

when the power is turned on.

When turning off the power, press the I /

key

twice following the message on the screen, or press

and hold the key for about one second.

For details on steps for turning off the power, see “To turn

off the power” on page 22 (GB).

2 INPUT key

Selects the input signal. Each time you press the key,

the input signal switches as follows:

3 VIDEO MEMORY key

You can adjust the image in advance and store the

setting in the VIDEO MEMORY 1 to 6. You can

recall the setting by pressing this key. Pressing this

key selects memory numbers 1 through 6. When you

keep on pressing, it selects OFF, and then starts again

with 1. You can easily set, change, and view the

image in a suitable setting.

For more details on how to set the video memory, see the

VIDEO MEMORY of the INPUT SETTING menu on page

27 (GB).

4 LIGHT key

If you press this key while the power is on, the keys

on the control panel will be displayed in orange.

Press this key again to turn off the light.

The light will turn off automatically if no keys are

operated for 30 seconds.

5 PATTERN key

Displays the test pattern on the screen for focus

adjustment. Press again to clear the test pattern.

6 RESET key

Resets the value of an item to its factory preset value.

This key functions when the menu or a setting item is

displayed on the screen.

7 ENTER key

Enters the settings of items in the menu system.

8 MENU key

Displays the on-screen menu. Press again to clear the

menu.

9 Arrow (M/m/</,) keys

Used to select a menu or to make various adjustments.

0 Indicators

LAMP/COVER: Lights up or flashes under the

following conditions:

• Lights up when the lamp has reached the end of

its life or the lamp does not turn on as a result

of high lamp temperature.

• Flashes when the lamp cover or air filter is not

secured firmly.

For further details, see troubleshooting on page 44 (GB).

TEMP (Temperature)/FAN: Lights up or flashes

under the following conditions:

• Lights up when temperature inside the projector

becomes unusually high.

• Flashes when the fan is broken.

For further details, see troubleshooting on page 44 (GB).

POWER SAVING: Lights up when the projector is

in the power saving mode. When POWER

SAVING in the SET SETTING menu is set to

ON, the projector goes into the power saving

mode if no signal is input or no keys are operated

for 10 minutes. Although the lamp goes out, the

cooling fan keeps running. The power saving

mode is canceled when a signal is input or any

key is pressed. However, in the power saving

mode, none of the keys function for the first 40

seconds.

B VIDEO B S-VIDEO

INPUT-B b INPUT-A b

LAMP/

COVER

TEMP/

FAN

POWER

SAVING

ON/

STANDBY

LIGHT

VIDEO MEMORY

ENTER

PATTERN

RESET

INPUT

4589

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony VPLVW12HT Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony VPLVW12HT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info