Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM5
Turning on the headset
When the headset is stored in the charging case
When the headset is not stored in the charging case
When the headset is not worn in your ears for about 15 minutes after being removed from the charging case, the headset
turns off automatically. In this case, turn the headset on by tapping the touch sensor of the headset or by putting the
headset into your ears. The headset units will also turn on when they are set into the charging case and then removed
from the charging case.
By using the “Sony | Headphones Connect” app, you can change the setting of the headset so that it will not be turned off
automatically.
When the headset is turned on
When both headset units are removed from the charging case, the connection is established between the left and right
headset units.
When turning on the headset for the first time after purchase or just after initializing the headset, the headset goes into
Bluetooth pairing mode.
If you tap the touch sensor when the headset is not connected via a Bluetooth connection, you will hear a notification
sound indicating that the headset is turned on.
When you use the headset for the first time after purchase or just after initializing the headset, the noise canceling
function is turned on automatically when you put the headset units into your ears.
If the noise canceling settings were changed previously, the settings are retained.
Related Topic
Using only one headset unit
Turning off the headset
What you can do with the “Sony | Headphones Connect” app
5-048-298-11(5) Copyright 2023 Sony Corporation
Lay the headset units on their sides and remove them from the charging case.
The headset turns on automatically.
When you remove only one headset unit from the charging case, only the removed unit turns on.
1
