Bedienungsanleitung Sony WMFS233 (Seite 2 von 2) (Englisch)

29682

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Playing a Tape

1 Unfasten the buckle.

2 Open the cassette lid and place a cassette.

3 Press N.

Adjust the volume by pressing VOL + or –.

To Press

Stop playback x

Wind rapidly* M or m

* If you leave the Walkman after the tape has been

wound or rewound, the battery will be consumed

rapidly. Be sure to press x.

Note

Do not open the lid of the cassette compartment while

the tape is running.

Listening to the Radio

1 If the HOLD function is on, turn the HOLD

switch in the opposite direction of the

arrow to unlock the controls.

Make sure that the tape has stopped

completely.

2 Press AM/FM or TV/WB (weather band)

to select the desired band and to turn on

the radio.

3 For manual tuning:

1 Press MENU repeatedly to set the cursor

on the display to TUNE MODE and

press SET to choose “MANUAL”.

2 Press PRESET/TUNING + or –

repeatedly to tune in to the desired

station.

Hold down PRESET/TUNING + or – for

a few seconds to scan for stations.

For preset tuning:

1 Press MENU repeatedly to set the cursor

on the display to TUNE MODE and

press SET to choose “PRESET”.

2 Press PRESET/TUNING + or –

repeatedly to recall the desired preset

station.

To use preset tuning, preset the stations

first (see “Presetting Radio Stations”).

To turn off the radio

Press RADIO OFF.

To improve the broadcast

reception F

•For TV/WB/FM: Extend the headphones/

earphones cord (antenna). If the reception is still

not good, press MENU repeatedly to set the cursor

on the display to FM MODE. Then press SET to

switch between “LOCAL” and none (DX) for best

reception.

•For AM: Reorient the unit itself.

Presetting Radio Stations

You can preset up to 40 radio stations – 7 for TV, 4

for WB, 24 for FM and 5 for AM.

Presetting Automatically Scanned

Stations

1 Press AM/FM or TV/WB.

2 Press ENTER for more than 3 seconds.

Preset number 1 will flash on the display

and the Walkman starts scanning the

stations from the lowest frequency and

stops for about 5 seconds when a station is

received.

3 If you wish to preset the received station,

press ENTER while the preset number is

flashing.

The received station is preset on preset

number 1 and the unit starts scanning for

the next receivable station.

4 Repeat Step 3 until all receivable stations

are preset.

To stop scanning

Press RADIO OFF. The radio is turned off at the

same time.

Notes

•If stations are already stored, the newly preset stations

replace the old ones when the above procedure is

completed.

•If stations cannot be preset automatically, preset

stations manually.

Presetting Stations Manually

1 Press AM/FM or TV/WB.

2 Press ENTER.

The frequency digits will flash on the

display.

3 While the frequency digits are flashing,

tune in to a station you wish to store using

PRESET/TUNING + or – and press

ENTER.

The preset number will flash on the

display.

4 While the preset number is flashing, select

the preset number you want using

PRESET/TUNING + or – and press

ENTER.

Notes

•If you cannot complete step 3 or 4 while the

indications are flashing, repeat from step 2.

•If a station is already stored, the new station replaces

the old one.

Playing the Preset Radio Stations

1 Press AM/FM or TV/WB.

2 Press MENU repeatedly to set the cursor

on the display to TUNE MODE. Then press

SET to choose “PRESET”.

3 Press PRESET/TUNING + or –.

To cancel a stored station

1 Follow the procedure above and in step 3, select

the preset number you want to cancel and then

press ENTER. The frequency digits will flash on

the display.

Press and hold PRESET/TUNING + or –. The

frequency digits start running up or down. Keep

holding down the button until “- - - -” is displayed.

3 Press ENTER while “- - - -” is flashing. A preset

number will flash on the display.

4 Press ENTER to cancel the stored station.

Scanning the Preset Radio Stations

— DAPS (Digital Auto Preset Scanning)

1 Press AM/FM or TV/WB.

2 Press and hold AM/FM or TV/WB pressed

in step 1 for 2 seconds or more.

The preset stations of the selected band will

be played for about 5 seconds each.

(During DAPS the indicators on the display

flash.)

3 Press AM/FM or TV/WB again to select

the station while the desired preset station

is being played.

Notes

•If there are no stations stored, the DAPS function does

not work.

•Until a station is selected in step 3, the DAPS function

turned on in step 2 will continue.

•In step 2 or 3, if you select a band which you did not

select in step 1 by pressing AM/FM or TV/WB, the

newly selected band will be played normally.

Using Other Functions

Locking the controls

Turn the HOLD switch to the direction of the arrow

to lock the controls.

The HOLD function only locks the radio operation

buttons, MENU, SET, ENTER, PRESET/TUNING

+ or – and VOL + or –.

Emphasizing bass sound

Press MENU repeatedly to set the cursor to MB

(mega bass) on the display. Then, press SET to turn

MB on. With each press, the indications change as

follows.

MB (mega bass) : emphasizes bass sound

No message: off (normal)

Notes

•If the sound is distorted with the mode “MB”, turn

down the volume or select normal mode.

•Bass emphasis may not show great effect if the

volume is turned up too high.

Protecting Your Hearing — AVLS

(Automatic Volume Limiter

System)

Press MENU repeatedly to set the cursor to AVLS

on the display. Then press SET to show “ ”.

The maximum volume is kept down to protect your

ears.

This warranty is valid only in the United States.

* The button has a tactile dot.

Battery life* (approximate hours)

Tape Radio

playback reception

Sony alkaline LR6 (SG)** 35 50

Sony R6P (SR) 10 15

* Measured value by the standard of JEITA (Japan

Electronics and Information Technology Industries

Association). (Using a Sony HF series cassette tape)

**When using a Sony LR6 (SG) alkaline dry battery

(produced in Japan).

Note

The battery life may be shorter depending on the operating

condition, the surrounding temperature and battery type.

Specifications

• Frequency range

TV: 2 - 13 ch

WB (weather): 1 - 7 ch

FM: 87.5 - 108 MHz

AM: 530 - 1 710 kHz

• Power requirements

One size AA (R6) battery: 1.5 V DC × 1

• Dimensions (w/h/d)

Approx. 117.8 × 94.0 × 37.8 mm (4

⁄

× 3

⁄

× 1

⁄

inches),

(excluding projecting parts and controls)

• Mass

Approx. 198g (7.0 oz) (main unit only)

• Supplied accessories

Stereo headphones or earphones (1)

Arm belt with arm belt clip (1)

Belt clip (1)

Design and specifications are subject to change without

notice.

AMFM

RADIO OFF

PRESET/TUNING +/–

TV/WB

AM/FM

Rubber cap

Air outlet

SET

ENTER

VOL +*/–

HOLD

Sony WMFS233 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info