Bedienungsanleitung Sony XAV-AX1000 (Seite 14 von 88) (Englisch, Italienisch, Spanisch)

752867

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

14GB

Basic Setting Operation

You can set items in the following setup categories:

General Settings (General), Sound Settings (Sound),

Visual Settings (Visual), BLUETOOTH Settings

(Bluetooth)

1Press HOME, then touch [Settings].

2Touch one of the setup category.

The items that can be set differ depending on

the source and settings.

3Move the scrollbar up and down to select

the desired item.

To return to the previous display

Touch .

To switch to the playback screen

Touch .

General Settings (General)

Language

Selects the display language: [English],

[Español], [Français], [Deutsch], [Italiano],

[Português], [], [ ], [ ], [ ],

[], [].

Demo

Activates the demonstration: [OFF], [ON].

Date/Time

Date Format

Selects the format: [DD/MM/YY], [MM/DD/YY],

[YY/MM/DD].

Time Format

Selects the format: [12-hour], [24-hour].

Set Date/Time

Sets the date and clock time manually.

Beep

Activates the operation sound: [OFF], [ON].

Rear View Camera

Selects the image from the rear view camera:

[OFF], [Normal], [Reverse] (mirror image).

[Guide Line Adjust] adjusts the guide on the

picture from the rear view camera.

Touch the near side  or far

side  (red portions) of the

guide to adjust.

Touch /// to adjust

the guide position, and touch

[ ] or [ ] to adjust the guide width.

Steering Control

Selects the input mode for the connected remote

control. To prevent a malfunction, be sure to

match the input mode with the connected

remote control before use.

Custom

Input mode for the steering wheel remote

control (follow the procedures of [ ] to register

functions on the connected remote control).

Preset

Input mode for the wired remote control

excluding the steering wheel remote control.

The steering button panel appears.

Press and hold the button you want to assign

to the steering wheel.

The button on the panel lights up (standby).

Press and hold the button on the steering

wheel you want to assign the function to.

The button on the panel will change the color

(highlighted or encircled by an orange line).

To register other functions, repeat steps 

and .

(Available only when [Steering Control] is set to

[Custom].)

Notes

• While making settings, the connected remote control

cannot be used even though some functions have

already been registered. Use the buttons on the unit.

• If an error occurs while registering, all the registered

information is cleared. Restart registration from the

beginning.

• This function may not be available on some vehicles.

For details on the compatibility of your vehicle, visit the

support site on the back cover.

Clock Time

Sets the clock time by the RDS data: [OFF], [ON].

Factory Reset

Initializes all the settings to the factory settings.

Firmware Version

Updates and confirms the firmware version.

Open Source Licenses

Displays the software licenses.

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony XAV-AX1000 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony XAV-AX1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info