Tap [Assign camera key] to use the camera key as a REC button or a Grab button. When [Record] is selected,
you can start recording by pressing the camera key even if a setting dialog is open.
Tap [Assign volume keys] to use the volume key as a REC button, to activate the volume key, or to control the
manual focus in the Cinema Pro app. When [Record] is selected, you can start recording by pressing the volume
key even if a setting dialog is open.
Tap [Rec button pos.] to change the position of the REC button and the Grab button.
Project settings
Tap an orange parameter to adjust the resolution and frame rate of the entire project or video clips. The project
settings can only be changed before recording the first video clip.
3.
Clip settings – Parameters to adjust for each video clip.
Tap [Look] to adjust the ambience of the video clip.
Tap [FPS] to adjust the frame rate. Select [120] to record a video in slow motion.
Tap [Lens] to select a lens.
[50 mm] will be made available through a software update. Software rollouts are a phased process; the timing
and availability vary by market and/or operator.
Tap [Iris] to change the aperture value when [Lens] is set to [24 mm].
Tap [ISO] to adjust the ISO value. Tap [Auto] when it is orange to adjust to the appropriate ISO value
automatically.
Tap [WB] to adjust the white balance. You can use the sliders to adjust the white balance. Tap [Reset] to reset the
slider values for the selected setting.
To adjust the white balance according to a selected white area, select [Custom], tap [Set], hold your device so
that the white area fully covers the frame in the center, and then tap [Set] again.
If you select [Auto], you can set whether to lock the white balance settings.
Tap [Shutter] to adjust the shutter speed. Tap [Auto] when it is orange to adjust the appropriate shutter speed
automatically.
Tap [Focus] to adjust the focus. Tap [AF] or [MF] to switch the focus mode to auto or manual. When the focus
mode is set to manual, you can adjust the focus markers and speed of focus pulling by tapping (Settings
icon). When the focus mode is set to auto, you can specify the focus area by tapping the viewfinder.
4.
Tap to start or stop recording.5.
Tap to capture the current frame as a still image.6.
Tap to hide or show the frame lines, grid lines, and the Metered Manual.7.
Level meter
Level meter helps you to measure the angle of the device and keep the picture horizontal. When your device senses
that it is level, the level meter turns green.
8.
Status indications9.
Thumbnail
Tap a thumbnail to view a video clip or still image. Swipe left or right to view the previous or next video clip or still
image.
To return to the Cinema Pro home screen, swipe down on the screen or tap (Back button).
Tap [All files] to view a video clip or still image that is not in the thumbnail view. While viewing a video clip or still
image, swipe left or right to view the previous or next one.
To return to the previous screen, swipe down on the screen or tap (Back button).
You can capture a still image from the video by tapping (Edit video icon) while playing.
Hint
120 fps videos are played back at 120 Hz even when [High refresh rate] in the Settings menu is set to off.
10.
